Alcatel One Touch 1046G manual

Alcatel One Touch 1046G
5.1 · 1
PDF user manual
 · 2 pages
user manualAlcatel One Touch 1046G
This product meets applicable
national SAR limits of 2.0 W/kg. The
specific maximum SAR values can be
found on page 21 of this user guide.
When carrying the product or using
it while worn on your body, either
use an approved accessory such as
a holster or otherwise maintain a
distance of 10 mm from the body to
ensure compliance with RF exposure
requirements. Note that the product
may be transmitting even if you are
not making a phone call.

Your mobile ..............

1.1 Keys
Navigation key
Confirm an option (press the middle of the key)
Pick up
Send a call
In idle screen:
Access call log (Redial) (press)
Switch on/Switch off the telephone (press and hold)
End call
Return to idle screen
Left softkey
Right softkey
Access your voicemail (press and hold)
In Edit mode:
- Press: access the symbols table
- Press and hold: enter zero
In Edit mode:
- Press: change input methods
In idle screen:
- Press: #
- Press and hold: activate/deactivate vibrate mode
In Edit mode:
- Press:
From Idle screen
- Press: dial ‘5’
- Press and hold: switch the LED Flashlight on/off
1.2 Main screen icons
In 1046G:
Battery charge level
Call forwarding activated: your calls are forwarded
Alarm or appointments programmed
Level of network reception
Voicemail message received
Missed calls
Radio is on
SMS unread
GPRS connected
Bluetooth activated
Silence mode: your phone does not ring, beep or
vibrate with the exception of the alarm
Vibrate mode
Flight mode
BT dialer activated
SD card detected
In 1046D:
Level of network reception.
Call forwarding activated: your calls are forwarded.
GPRS connected

Getting started .........

2.1 Set-up
Removing and installing the back cover
Removing and installing the battery
Inserting and removing the SIM card
Place the SIM card with the chip facing downwards and slide it
into its housing. Make sure that it is correctly inserted. To
remove the card, press it and slide it out.
5.2 View message
You can review messages which are synchronized between
your 1046G/1046D and the host phone.
First, make sure the host phone can support the MAP
protocol and that the Remote SIM/MSG setting is ON.
Otherwise you will not be able to access messages in the
host phone.
This phone can synchronize new messages with the host
phone. You can view and compose new messages and reply
to messages sent to the host phone via your 1046G/1046D.
Sent messages will be synchronized with the host phone’s
sent box.
If the host phone is dual SIM mode, you may use 1046G/1046D
to reply to host phone’s messages via SIM1 but not available
for SIM2.

Call log ..............

* You can review all of the host phone’s missed, outgoing and
incoming calls but you will not be able to delete this information
from the host phone by using the local (1046G/1046D) phone.
You can select a contact in the host phone’s call log list and then
select Options to make a call or send a text message to them
using the local phone.
6.1 Access
You can access the function using the following options:
from main menu
Press the send key from Home screen
For dual SIM model, the complete contacts of both SIM1
and SIM2 are available in this menu

Quick Start Guide

For more information about how to use the phone, please go
to to download complete user
manual (English version only). Moreover, from the website
you can also consult FAQ, realize software upgrade, etc.
(English version only).
The icons and illustrations in this guide are provided for information
purposes only.

Calls ..........................

3.1 Making a call
Dial the desired number then press the
key to place the
call. If you make a mistake, you can delete the incorrect digits by
pressing the right softkey.
To hang up the call, press the
Making an emergency call
If your phone is covered by the network, dial emergency number
and press the
key to make an emergency call. This works
even without a SIM card and without typing the PIN code.
3.2 Calling your voicemail
To access your voicemail, hold down the
3.3 Receiving a call
When you receive an incoming call, press the
key to talk
and then hang up using the
3.4 Available functions during the call
During a call, you can use your directory, your calendar, short
messages, etc. without losing your correspondent.

Contacts .............

4.1 Consulting your contacts
To access the Contacts from the main screen, press the
key and select the
icon from the menu.
Contact your network operator to check service availability.
Charging the battery
Connect the battery charger to your phone and mains socket
Charging may take about 20 minutes to start if the battery is
Be careful not to force the plug into the socket.
Make sure the battery is correctly inserted before connecting
the charger.
The mains socket must be near to the phone and easily
accessible (avoid electric extension cables).
When using your telephone for the first time, charge the
battery fully (approximately 3 hours). You are advised to fully
charge the battery (
To reduce power consumption and energy waste, when
battery is fully charged, disconnect your charger from the
plug; reduce the backlight time, etc.
The charge is complete when the animation stops.
2.2 Power on your phone
Hold down the
key until the phone powers on.
2.3 Power off your phone
Hold down the
key from the main screen.
6.2 Available options
When you press “Options”, you can have access to View,
Send message, Save to Contacts, Edit before call, Add
to Blacklist, Add to Whitelist, Delete etc.

Camera .............

Your mobile phone is fitted with a camera for taking photos that
you can use in different ways:
Store them in your “ My files\Images”.
Customise your main screen.
Switch to "Video" function through pressing Camera\Options\
Access video, then you are in framing mode. You may use the
mobile screen as a viewfinder and press "Options" for the
settings of Quality.
Make sure that microSD card is well inserted before taking

Settings ................

From the main menu, select the menu icon and select the
function of your choice in order to customise your telephone:
Profiles, Dual SIM settings
, Phone settings, Call
settings, Network, Connectivity, Security, Regulatory &
Safety, Restore default.

Tools .....................

9.1 Alarm
Your mobile phone has a built-in alarm clock with a snooze
9.2 Calculator
Enter a number, select the type of operation to be performed,
and enter the second number, then press “=” to display the
9.3 Calendar
Once you enter this menu from the main menu, there is a
monthly-view calendar for you to query date.
9.4 Notes
You can create a note in text format by accessing “Tools\
Notes” from the main menu.
9.5 Bluetooth
Access this feature by pressing to enter the main menu,
then selecting “Tools\Bluetooth”.
* BT Dialler
This phone includes a BT dialler feature which means that you
can connect your 1046G/1046D with a host phone using a
Bluetooth connection. Once they are successfully linked, you
can then receive and make calls from the host phone using
this phone. Other options include syncing with the host
phone’s contacts; viewing its call log; and viewing/making SMS
messages sent to/from the host phone.
You can pair with the host phone by using Bluetooth.
Activate host connection: Turn Bluetooth on, select to see
the list of available Bluetooth devices and then press BT dialler\
You need to confirm your password (automatically displayed) in
the host phone once you have chosen to pair it with your
When pairing is successful, the host name will be visible on your
You only need to pair your 1046G/1046D once. It automatically
reconnects to your host phone once you turn on Bluetooth in
your 1046G/1046D and host phones.
9.6 Converter
Weight converter and Length converter.
9.7 Voice Alarm
With this menu, you may create the voice file and set it as the
9.8 Fake call
This program enables you to call yourself by simulating a caller
number/name, ringtone at a scheduled time. It helps you to
politely escape from social situations at any time you wish. This
call can be rejected by
9.9 Call filter
Enable blacklist, all callers in the list will be automatically blocked.
Enable whitelist, only callers in the list can be connected. You
are allowed to add 20 contacts to each list from the Contacts,
call log, Messages or create directly by pressing
9.10 Torch
To light in darkness, you may activate “Torch” by below
In idle screen, press and hold
to activate the flashlight;
or press and hold to deactivate it.
9.11 WAP
Access Wap options: Homepage, Bookmarks, Go to URL,
Recent pages, Settings.
Make sure that microSD card is well inserted before accessing
this feature.
9.12 Services
Contact your network operator to check service availability.

Media ...................

10.1 FM radio
Your phone is equipped with a radio
with RDS functionality.
You can use the application as a traditional radio with saved
channels or with parallel visual information related to the radio
program on the display if you tune to stations that offer Visual
Radio service. You can listen to it while running other
10.2 Images
A library links to the images (stored in “Images”) in phone or
SD card set as wallpaper, power on/off display or sent by
Bluetooth, etc.
10.3 Recorder
Accessing “Recorder” allows you to make voice or sound
10.4 Videos
Accessing "Videos" allows you to view the video stored in your
phone. Press "Options" to Play/Send/Rename/Delete the file.

Music ...................

Access this feature from the main menu by selecting “Music”.
You will have full flexibility of managing music on your memory
* When the host phone is playing music, you can control the
music player and music using the local phone.
English - CJB27FBALAAA
Left softkey
Pick up/Send call
Call log
(press and hold)
Right softkey
Switch on/Switch off
End call
LED Flashlight
Navigation key:
Menu/Confirm an option

My files ................

You will have access to all audio and visual files stored in memory
card in My files. You can access a number of items with this
option: My audios, Images, Received, etc.
Inserting the memory card:
To release the microSD card holder, slide it in the direction of
the arrow and lift it. Then insert the microSD card with the
golden contact downward. Finally, turn down the microSD
holder and slide it in the opposite direction to lock it.
The quality of the radio depends on the coverage of the radio station in
that particular area.
To prevent possible hearing damage, do not listen at
high volume levels for long periods. Exercise caution
when holding your device near your ear while the loudspeaker
is in use.
* You can review contacts which are synchronized between
your 1046G/1046D and the host phone. By pressing the
and up/down keys, you can go to the last/next contact.
Select the contact you wish to call and then press to make
the call. You can also send a message to the contact by
selecting Options\Send message.
4.2 Adding a contact
You can add a new contact to phone or SIM card by selecting
Add contact”.

Messages ............

5.1 Create message
From the main menu select “Messages” to create text. You
can type a message and you can also modify a predefined
message in Templates. While writing a message, select
Options” to access all of the messaging options. You can
save your messages that you send often to Drafts.
An SMS will be converted to MMS automatically when images,
videos, audio, slides or attachments are inserted.
An SMS message of more than a certain number of
characters (the number of characters depends on
your language) will be charged as several SMS. An
MMS message containing photos and/or sounds
may also be billed as more than one message.
Specific letters (accent) will increase the size of
the SMS, this may cause multiple SMS to be sent to
your recipient.
* Depends on software version and countries. If your phone have this feature,
please activate BT dialer firstly (refer to 9.5 BT dialer for activation).
1046D only.
1046D only.


Latin input mode ...

To write messages, there are two writing methods:
Normal: this mode allows you to type a text by choosing
a letter or a sequence of characters associated with a
Predictive with the eZi mode: this mode
speeds up the
writing of your text.
key in edit mode
Press: access the symbols table
Press and hold: enter zero
* Depends on software version and countries.
* Depends on software version and countries. If your phone have this feature,
please activate BT dialer firstly (refer to 9.5 BT dialer for activation).
* Depends on software version and countries. If your phone have this feature,
please activate BT dialer firstly (refer to 9.5 BT dialer for activation).
IP4751_ALCATEL 1046G_1046D_QG_Eng_GB_11_140326.indd 1IP4751_ALCATEL 1046G_1046D_QG_Eng_GB_11_140326.indd 1 2014-3-26  9:42:382014-3-26  9:42:38

View the manual for the Alcatel One Touch 1046G here, for free. This manual comes under the category Smartphones and has been rated by 1 people with an average of a 5.1. This manual is available in the following languages: English. Do you have a question about the Alcatel One Touch 1046G or do you need help? Ask your question here

Need help?

Do you have a question about the Alcatel and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Alcatel owners to provide you with a good answer.

Number of questions: 0

One Touch 1046G
Manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Alcatel One Touch 1046G below.

Is your question not listed? Ask your question here

No results