Botex DMX DD-2 RDM manual

Botex DMX DD-2 RDM
8.3 · 1
PDF user manual
 · 1 page
user manualBotex DMX DD-2 RDM
DocID: 420102_19.05.2021
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • Germany •


The DMX splitter is equipped with a DMX input and
two DMX outputs.
2-way DMX splitter
1 × DMX input
2 × DMX output
Connections galvanically isolated
RDM capable
Protocols: DMX 512 and RDM
XLR in / out: 3-pin / 5-pin
EU safety plug with xed cable (approx. 1.3m)

Technical specications

Input connections: 2×DMX / RDM in,
XLR chassis plug,
1×3- and 5-pin each
Output connections: 4×DMX / RDM out,
XLR chassis socket,
2×3- and 5-pin each
Control protocols: DMX-512/RDM
Supply voltage: 230V~, 50Hz
Power consumption: 7.5W max.
Fuse: 5mm×20mm,
1A, 250V, fast-acting
Mounting options: wall mounting
Dimensions (W×H×D): 220×63×132mm
Weight: 1.10kg
Ambient conditions
Temperature range: 0 °C…40 °C
Relative humidity: 20 %…80 %
(non condensing)
Safety instructions
Intended use
This device is meant to be used to distribute one DMX / RDM signal to
two units. Any other use or use under other operating conditions is con-
sidered to be improper and may result in personal injury or property
damage. No liability will be assumed for damages resulting from improper use.
Dangers for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that children
do not detach any small parts (e.g. knobs or the like) from the unit. They could
swallow the pieces and choke! Never let children unattended use electrical de-
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt,
and strong vibrations.
Protecting the environment
For the transport and protective packaging, environmentally friendly
materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of. Do not
just dispose of these materials with your normal household waste, but make
sure that they are collected for recycling. Please follow the notes and markings
on the packaging.
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dispose
of your old device with your normal household waste. Dispose of this
product through an approved waste disposal rm or through your local
waste facility. Comply with the rules and regulations that apply in your country.
If in doubt, consult your local waste disposal facility.

DD-2 RDM | DMX-Splitter

View the manual for the Botex DMX DD-2 RDM here, for free. This manual comes under the category splitters and has been rated by 1 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Botex DMX DD-2 RDM or do you need help? Ask your question here

Need help?

Do you have a question about the Botex and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Botex owners to provide you with a good answer.

Number of questions: 0

Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Botex DMX DD-2 RDM below.


Is the manual of the Botex DMX DD-2 RDM available in English?

Yes, the manual of the Botex DMX DD-2 RDM is available in English .

Is your question not listed? Ask your question here

No results