Name: Cateye Strada RD200 Cadence
Brand: Cateye
SKU: 4870
Rating: 68 (2 reviews)

user manualCateye Strada RD200 Cadence

MENUMENUMENUMENUMODEMODEMODEMODEMODEMODETire circumferencereference table

12 x 1.75

14 x 1.50

14 x 1.75

16 x 1.50

16 x 1.75

18 x 1.50

18 x 1.75

20 x 1.75

20 x 1-3/8

22 x 1-3/8

22 x 1-1/2

24 x 1

24 x 3/4

Tubular

24 x 1-1/8

24 x 1-1/4

24 x 1.75

24 x 2.00

24 x 2.125

26 x 7/8

26 x 1

(

)

26 x 1

(

)

26 x 1.25

26 x 1-1/8

26 x 1-3/8

26 x 1-1/2

26 x 1.40

26 x 1.50

26 x 1.75

26 x 1.95

26 x 2.00

26 x 2.10

26 x 2.125

26 x 2.35

26 x 3.00

27 x 1

27 x 1-1/8

27 x 1-1/4

27 x 1-3/8

650 x 20C

650 x 23C

650 x 35A

650 x 38A

650 x 38B

700 x 18C

700 x 19C

700 x 20C

700 x 23C

700 x 25C

700 x 28C

700 x 30C

700 x 32C

700C Tubular

700 x 35C

700 x 38C

700 x 40C

29 x 2.1

29 x 2.3

935

1020

1055

1185

1195

1340

1350

1515

1615

1770

1785

1753

1785

1795

1905

1890

1925

1965

1920

1913

1952

1953

1970

2068

2100

2005

2010

2023

2050

2055

2068

2070

2083

2170

2145

2155

2161

2169

1938

1944

2090

2125

2105

2070

2080

2086

2096

2105

2136

2146

2155

2130

2168

2180

2200

2288

2326

Tire size L (mm)MENUMENUMODEMODE

L mm

MODE

MODEMODEWhen the computer ismounted on the bracket

3 mm

Pull

securely

Pull

securelyPull securely

CATEYE STRADA CADENCE

CYCLOCOMPUTER CC-RD200

ENG

Before using the computer, please thoroughly read this manual and keep it forfuture reference.Preparing the computer

km/h ↔ mphIncreaseMove digits(by pressing& holding)Registerthe settingRegister

the

settingClear all data (initialization)Press the AC button on the back.Select the desired speed unitsSelect “ ” or “ ”.Enter the tire circumferenceEnter the tire circumference of your bicycle in

mm.

* Refer to the tire circumference reference table.Set the clockWhen MODE is pressed and held, “Displayed time”,“Hour”, and “Minute” will appear, in this order.24h ↔12h, orincreasethe valueSwitch thescreen ormove digits(by pressing& holding)Registerthe setting(finish)Measure wheel circumference (L) of your bikeTo get the most accurate calibration do a wheel rollout. With the valve stem perpendicular to theground, mark the pavement at the valve stem. Withthe riders weight on the bike, roll the wheel one tirerevolution in a straight line and mark the groundwhen the valve stem is perpendicular to the groundagain. Measure the distance in millimeters. This isthe most accurate wheel calibration number. : Speed unit : Wheel size iconPush!Battery case coverContact WARNING / CAUTION• Do not concentrate on the computer while riding. Ride safely!• Install the magnet, sensor, and bracket securely. Check these periodically.• If a child swallows a battery, consult a doctor immediately.• Avoid having the computer in direct sunlight for unnecessary or extended periods.• Do not disassemble the computer.• Do not drop the computer. Doing so may result in a computer malfunction or damage.

• When using the computer installed on the bracket, change the MODE by pressing on the three dots

below the screen. Pressing hard on other areas can result in malfunction or damage to the computer.• Never place the computer on a metal surface. If you do, the contact points will conductelectricity, discharging the battery.• Tighten the dial on the Flex-Tight bracket by hand only. Over-tightening can damage the bracketthreads.• When cleaning the computer, bracket and sensor, do not use thinners, benzene, or alcohol.• Dispose of used batteries according to local regulations.• LCD screen may be distorted when viewed through polarized sunglass lenses.How to install the unit on your bicycleInstall the speed sensor and wheel magnetInstall the sensor and magnet :Sensor line* When installing cadence sensor 4, insertthe sensor rubber pad 7 if necessary.MagnetSensorMagnetSensor

The magnet should passthrough the sensor line.

The clearance between the sensor surfaceand the magnet must not exceed 3 mm.1 Bracket band2 Bracket3 Speed sensor4 Cadence sensor5 Wheel magnet6 Cadence magnet

Sensor rubber pad8 Bracket rubber pad9 Nylon ties (x10)* After installation, check that the speed sensor and cadence sensor are functioning properly.In the case of the speed sensor, lift the rear wheel off the ground and spin the wheel tocheck the speed is displayed.

In the case of the cadence sensor, press MODE to display C (cadence) on the mode screen.

Rotate the crank in the non driving direction and check cadence is displayed.If the speed is not displayed, check that conditions

and

are satisfied.While supporting itby hand,push it out as if liftingthe front upRear wheel spokeToward the sensor lineRemove/install thecomputerInstall the cadence sensor and cadence magnetLeft crank (Inside)Toward the sensor lineCaution:Round off the cut edge of thebracket band to prevent injury.

Cut

Attach the bracket to the stem or handlebarCaution:Tighten the bracket, ensuring that thecable does not get caught in the stem.

Stem

HandlebarCaution:Tighten the bracket, ensuring that the cabledoes not get caught in the handlebar.Route the cableCaution:Turn the handlebar to makesure wire does not hinder fullrotation.When attaching the bracket to the handlebarWhen attaching the bracket to the stemUse the nylon tie 9 to securethe cable on the frame. Windthe cable on the rear brakecable as shown.Left Chain Stay (Inside)Left Chain Stay (Outside)Click

View the manual for the Cateye Strada RD200 Cadence here, for free. This manual comes under the category bicycle computers and has been rated by 2 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Cateye Strada RD200 Cadence or do you need help? Ask your question here

Need help?

Do you have a question about the Cateye and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Cateye owners to provide you with a good answer.

Number of questions: 0

General

	Cateye
	Strada RD200 Cadence
	bicycle computer
	4990173017317
	English
	Manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Cateye Strada RD200 Cadence below.