Name: Cateye Strada RD300
Brand: Cateye
SKU: 8766
Rating: 77 (1 reviews)

user manualCateye Strada RD300

Tire circumferencereference table

12 x 1.75

14 x 1.50

14 x 1.75

16 x 1.50

16 x 1.75

18 x 1.50

18 x 1.75

20 x 1.75

20 x 1-3/8

22 x 1-3/8

22 x 1-1/2

24 x 1

24 x 3/4

Tubular

24 x 1-1/8

24 x 1-1/4

24 x 1.75

24 x 2.00

24 x 2.125

26 x 7/8

26 x 1

(

)

26 x 1

(

)

26 x 1.25

26 x 1-1/8

26 x 1-3/8

26 x 1-1/2

26 x 1.40

26 x 1.50

26 x 1.75

26 x 1.95

26 x 2.00

26 x 2.10

26 x 2.125

26 x 2.35

26 x 3.00

27 x 1

27 x 1-1/8

27 x 1-1/4

27 x 1-3/8

650 x 20C

650 x 23C

650 x 35A

650 x 38A

650 x 38B

700 x 18C

700 x 19C

700 x 20C

700 x 23C

700 x 25C

700 x 28C

700 x 30C

700 x 32C

700C Tubular

700 x 35C

700 x 38C

700 x 40C

29 x 2.1

29 x 2.3

935

1020

1055

1185

1195

1340

1350

1515

1615

1770

1785

1753

1785

1795

1905

1890

1925

1965

1920

1913

1952

1953

1970

2068

2100

2005

2010

2023

2050

2055

2068

2070

2083

2170

2145

2155

2161

2169

1938

1944

2090

2125

2105

2070

2080

2086

2096

2105

2136

2146

2155

2130

2168

2180

2200

2288

2326

Tire size L (mm)

CATEYE STRADA WIRELESS

CYCLOCOMPUTER CC-RD300W

L mm

SEN

SOR

ZONE

5 mm

Install the sensor and magnetSensor zoneInside of right front fork

Max

70 cmYES! NO!

The distance between the computerand the sensor must not exceed thetransmission range of 70 cm. The backof the computer must face the sensor.

The magnetmust passthrough thesensor zone.

The clearancebetween thesensor surfaceand the magnetmust notexceed 5 mm.

SENSOR

ZONE

SENSOR

ZONE

Click

For wing type handlebar or oversized stem, bracket can be mounted using the Bracket Holder and nylon ties. (Option) Caution:Make sure that the back of the computer faces the sensor.* The computer may not function appropriately on somestem if its back does not face the sensor as shown in

When attaching the bracket to the stemSpokeToward thesensor zoneInstall the magnetWhile supporting it by hand,Handlebar

Cut

Attach the bracket to the stem or handlebarRemove/install thecomputerCaution:Round off the cut edgeof the bracket band toprevent injury.Install the sensorInside of right front fork* After installation, rotate the front wheel gently to check that the speed is displayed on thecomputer. If the speed is not displayed, check that conditions

, and

, above, havebeen done appropriately.

Stem

Pull

securely* Install the sensor as close to the upperpart of the front fork as possible.push it out as if lifting the front upWhen attaching the bracket to the handlebar

How to install the unit on your bicycle

1 Bracket band2 Bracket

Nut

4 Speed sensor5 Magnet6 Sensor rubber pad7 Bracket rubber pad8 Nylon ties (x2)

ENG

Before using the computer, please thoroughly read this manual and keep it forfuture reference. WARNING / CAUTION• Do not concentrate on the computer while riding. Ride safely!• Install the magnet, sensor, and bracket securely. Check these periodically.• If a child swallows a battery, consult a doctor immediately.• Do not leave the computer in direct sunlight for unnecessary or extended periods.• Do not disassemble the computer.• Do not drop the computer. Doing so may result in a computer malfunction or damage.

• When using the computer installed on the bracket, change the MODE by pressing on the three dots

below the screen. Pressing hard on other areas can result in malfunction or damage to the computer.• Tighten the dial on the Flex-Tight bracket by hand only. Over-tightening can damage the bracketthreads.• When cleaning the computer, bracket and sensor, do not use thinners, benzene, or alcohol.• Dispose of used batteries according to local regulations.• LCD screen may be distorted when viewed through polarized sunglass lenses.Wireless SensorThe sensor was designed to receive signals within a maximum range of 70 cm, to reduce chance ofinterference.When adjusting the wireless sensor, note the following:• Signals cannot be received if the distance between the sensor and the computer is too great.• The transmission distance may be shorter due to low temperature or low battery.• Signals can be received only when the back of the computer is facing the sensor.Interference may occur, resulting in incorrect data, if the computer is:• Near a TV, PC, radio, motor, or in a car or train.• Close to a railroad crossing, railway tracks, TV stations and/or radar base.• Using with other wireless devices in close proximity.This device complies with Part 15 of the FCC Rules.Operation is subject to the followingtwo conditions:(1)This device may not cause harmful interference,and (2)this devicemust accept any interference received,including interference that may cause undesiredoperation.Modifications The FCC requires the user to be notified that any changes or modificationsmade to this device that are not expressly approved by CatEye Co.,Ltd.May void the user’s authority to operate the equipment.

MODE

MENUMENUMODEMODE

MODEMODE

MODE

MENUMENUMODEMODE

km/h ↔ mphIncreaseMove digits(by pressing& holding)Register thesettingRegisterthe settingClear all data (initialization)Press the AC button on the back.Select the desired speed unitsSelect “ ” or “ ”.Enter the tire circumferenceEnter the tire circumference of your bicycle in mm.* Refer to the tire circumference reference table.Set the clockWhen MODE is pressed and held, “Displayedtime”, “Hour”, and “Minute” will appear, inthis order.24h ↔ 12h,or increasethe valueSwitch thescreen ormove digits(by pressing& holding)

Preparing the computer

Battery case coverPush!When the computer ismounted on the bracket : Speed unit : Wheel size icon: Sensor signal reception iconMeasure wheel circumference(L) of your bikeTo get the most accuratecalibration do a wheel roll out.With the valve stemperpendicular to the ground,mark the pavement at the valvestem. With the riders weight onthe bike, roll the wheel one tirerevolution in a straight line andmark the ground when thevalve stem is perpendicular tothe ground again. Measure thedistance in millimeters. This isthe most accurate wheelcalibration number.

View the manual for the Cateye Strada RD300 here, for free. This manual comes under the category Bicycle Computers and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Cateye Strada RD300 or do you need help? Ask your question here

Need help?

Do you have a question about the Cateye and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Cateye owners to provide you with a good answer.

Number of questions: 0