Cateye Velo 8 CC-VL810 manual

Cateye Velo 8 CC-VL810
7.2 · 3
PDF user manual
 · 2 pages
user manualCateye Velo 8 CC-VL810
U.S. Pat. Nos. 4642606, 5236759 and Pat. PendingCopyright©2011 CATEYE Co., Ltd.CCVL51/81-110930 066600560


1 2 3
(on Back)
6 7


5 mm
Before using the computer, please thoroughly read this manual and keep it for future reference. Caution• Do not concentrate on the computer operations while riding. Always be sure to ride safety.• Be sure to securely mount the magnet, sensor and bracket on your bicycle, and periodically check tosee if any parts have loosened.• Used batteries are harmful if swallowed by mistake. They must be disposed in accordance with localregulations.• Do not leave the main unit exposed to direct sunlight. Never disassemble the main unit.• For cleaning of the main unit or accessories, use diluted neutral detergent on a soft cloth, and then wipeit off with a dry cloth. Do not use paint thinner, benzine or alcohol since such chemicals may damagethe surface.Package Contents
1 Bracket 2 Wire 3 Sensor
4 Magnet 5 Nylon Ties (x 7) IMPORTANT!Correct positions of the sensor and the magnet:
When rotating the front wheel, the magnet's 4 center must be aligned with the sensor's 3 marking
The distance between the sensor 3 and the magnet 4 must be less than 5 mm.
Name of Parts Speed 0.0 (4.0) to 299.9 km/h [0.0 (3.0) to 185.0 mph] Mode Symbol Indicates the mode currently selected.(The corresponding value is indicated on the lower line.)
Pace Arrow* Indicates if the current speed is faster or slower than the average speed. (
Faster Slower) Speed Scale Sub Display (selected function) Battery Case Cover Contact*The Pace Arrow feature is only available on the VELO8. Pace Arrows are not displayed on the VELO5.Display functionTm* [Elapsed Time] 0:00'00" to 9:59'59"
Dst [Trip Distance] 0.00 to 999.99 km [mile]
Av* [Average Speed] 0.0 to 299.9 km/h [0.0 to 185.0 mph]
(Measurable up to 27 hrs or 999.99 km/h)
Mx [Maximum Speed] 0.0 (4.0) to 299.9 km/h [0.0(3.0) to 185.0 mph]
Cal* [Calorie Consumption] 0.0 to 9999.9 kcal (estimated from speed data)
Odo [Total Distance] 0.0 to 9999.9 km [mile]
[Clock] 0:00' to 23:59' [1:00'to 12:59']
* This feature is only available on the VELO8. No measurement is done on the VELO5.Start/Stop of MeasuringThe unit starts measuring automatically when you start pedaling, and stops measuring when your cometo a stop.The upper display always shows the Current Speed.Shift of Lower DisplayEach time you press the MODE button, a different data value appears on the lower line.
Power Saving FunctionIf the main unit does not receive a signal after about 10 minutes, the main unit enters Power SavingMode and displays the clock count only. To re turn to normal display, press the MODE button or startyour bicycle again to cancel the Power Saving function.Data ResetWhen a screen with the Reset mark in the OPERATION FLOW is displayed, continue pressing theMODE button and the measured data will return to zero. However, the Odometer (total distance) andClock do not return to zero.How to Set ClockIn the clock mode, press SET button on the back, and the display enters clock setting mode.*If Km/h has been selected for speed scale, it becomes 24-hour clock.If mph has been selected, it becomes 12-hour clock.
How to Change Tire SizeDisplay the Total Distance (Odo) and press the SET button to change the tire size. You can select a tiresize in two ways: Either select from among preset sizes
or enter the tire’s circumference directly inincrements of 1 cm.
Maintenance• If the contact of the unit or the bracket gets wet, dry it off with a cloth. If they become rusty, it willcause speed detection error.• If the gaps between the buttons and the unit get clogged with mud or sand, wash them away withwater.TroubleshootingNo display.Has the battery in the main unit run down?Replace it with a new one.The main unit may still have a charge.Put the battery in backwards to short the unit then install properly and do all clear operation.Incorrect data appears.Do all clear operation.
Current speed does not appear. (First, short-circuit the contact of the main unit a few times with a piece
of metal. If current speed appears, the main unit is working fine and the cause should be attributed to thebracket or the sensor.)Is the clearance between the sensor and the magnet too large?Are the magnet's center and the sensor's marking line aligned?Re-adjust the positions of the magnet and the sensor. (The clearance should be less than 5
Is the cord broken?Even if the outside of the cord looks normal, there could be damage.Replace the bracket and sensor set with a new one.Is there anything sticking on the contact of the main unit or the bracket?Clean the contact with a cloth.Current speed disappears when using in the rain.Wipe any water or dirt from the contacts and apply a water repellent silicon grease. Do notapply standard grease, as it may cause damage to the bracket.Replacing BatteryIf the screen becomes dim, it is the time to replace the battery.
*Insert a new lithium battery (CR2032) with the (+) mark facing up.After replacing the battery, perform the all-clear operation. Follow SETTING to select the measurementunit & tire size and set the clock display to the current time.Specification
Battery --------------------- Lithium Battery CR2032 x 1 (battery life: approx. 3 years)
(*The life of the factory-loaded battery might be shorter than this.)
Microcomputer ----------- 4-bit 1-chip (Crystal controlled oscillator)
Display --------------------- Liquid crystal displaySensor --------------------- No-contact magnetic sensor
Tire Sizes ------------------ Tire sizes of 16, 18, 20, 22, 24, 26, 700C, and 27 inches, or tire peripheral
lengths from 100 to 299 cm (Initial value: 26 in.)
Working Temperature --- 0 °C 40 ° C
Length of Wire ------------ 70 cm
Dimension/Weight ------- 2-1/16" x 1-1/2" x 45/64" (52.5 x 38 x 18 mm) / 0.95 oz (27 g)
* The specifications and design are subject to change without notice.

User manual

View the manual for the Cateye Velo 8 CC-VL810 here, for free. This manual comes under the category Bicycle Computers and has been rated by 3 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Cateye Velo 8 CC-VL810 or do you need help? Ask your question here

Need help?

Do you have a question about the Cateye Velo 8 CC-VL810 and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Cateye Velo 8 CC-VL810 owners to provide you with a good answer.

Number of questions: 0

Cateye Velo 8 CC-VL810 specifications

Below you will find the product specifications and the manual specifications of the Cateye Velo 8 CC-VL810.

Brand Cateye
Model Velo 8 CC-VL810
Product Bicycle Computer
Language English
Filetype manual_type_manual (PDF)

Questions & answers

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Cateye Velo 8 CC-VL810 below.

Is your question not listed? Ask your question here

No results