Edge Boost Pro Micro manual

Edge Boost Pro Micro
5.1 · 1
PDF user manual
 · 1 page
user manualEdge Boost Pro Micro
Version 1013-1.6INTRODUCTION
● A computer with a Micro SATA interface connector
● An available Micro SATA power connector
Ensure all power sources, including the wall power adapter and battery,
are disconnected from your system before installing
Do not expose the SSD to extreme temperatures or sunlight
Do not touch the gold SATA connectors of the SSD
Be conscious of static electricity—wear a wrist strap while installing the
SSD to minimize this
The EDGE Boost SSD comes with a powerful AES hardware encryption chip. When
enabled, the SSD becomes impossible to access without knowing the password.
Even if the SSD is physically removed from your system, all stored data is invisible
and secure. Not all systems support drive encryption (also called the ATA Security
Password)—please consult your system’s user manual to ensure this feature is
You must first enable the drive encryption to use it. Enabling this function varies
from system to system, but the following is a typical example
SSD will be permanently inaccessible if you forget or lose your password!):
1. After installing the SSD, access your computer’s BIOS during system startup.
2. Select the “Security” option.
3. Select the “Password” option.
4. Select the option displayed as “Hard Disk Password” or similar for the Boost SSD.
5. Create and reconfirm a password. After complete, the encryption function is
active. You will need to input your password every time you start your computer to
access the SSD.
1. Ensure all power sources, including the wall power adapter and
battery, are disconnected from your system.
2. Disassemble your computer’s casing and locate the hard drive.
3. Remove the old hard drive and replace with the Boost SSD. If the old
hard drive has any hardware attached to it, remove it and attach to
the Boost SSD in the same manner.
4. After the install is complete, reassemble the computer to its original
state and restore power.
5. Power on the system and ensure that the system’s BIOS recognizes
the Boost SSD. Note: You will need to format the SSD before use if
you plan to use it as a secondary storage drive.
PRECAUTIONSUSING THE ENCRYPTION FUNCTIONWARRANTYThis SSD is backed by a 5-year warranty. When properly installed, EDGE Memory warrants that this product will be free from substantial defects in material and workmanship for the aforementioned warranty period. For complete warranty details, please visit www.EDGEMemory.com.



Help getting started with your EDGE Boost Micro Solid State Drive

Quick Start Guide

Your installation experience will vary depending on the type of notebook
or other system you install the Boost SSD into—refer to your system’s
user manual while installing. The following are some general directions
that may help while installing:
FORMATTINGThe Boost SSD comes unformatted—you must format the device before using. The following instructions are designed for Windows 7. Other versions of Windows will be similar, but may vary. If using a Mac, please access
Utilities -> Disk Utility -> Partition to initiate a format.
1. Right click on
Computer (or My Computer) and select Manage.
2. Select
Disk Management in the left pane.
3. You will receive an
Initialize Disk prompt—this will only apply to any
unformatted devices you have installed (i.e. – the SSD). Choose
note the Disk number (ex Disk 1, Disk 2, etc), and select
4. In the bottom pane of Disk Management, find the disk number from step 3. Right-click on the
unallocated box and select New Simple Volume.
5. The
New Simple Volume/Partition wizard will appear. Select Next on
the first screen.6. On the
Specify Volume Size screen, ensure the Simple Volume size
number matches the maximum disk space (default). Select
Assign a drive letter not already in use to the SSD. Select Next.
8. Choose a file system format (NTFS recommended for Windows) with a
default allocation unit size and give the SSD a Volume Label name.
perform a quick format and uncheck enable file and folder
. Click Next.9. Review the wizard summary and select
Finish. The SSD will be
formatted. Once complete, you can close
Computer Management.
FORMATTING (continued)
Need Help?
Thank you for purchasing an EDGE Boost SSD! This guide is designed to give you basic information on installing and using the SSD, as well as some precautions to adhere to.It is important to be familiar with the environment in which you plan to install the SSD in before getting started. Disassembling and reassembling covers, lids, bezels, and other items may be required for installation. Please consult your system’s user manual or contact an IT professional for assistance if you are unsure about the install process.Please note that additional accessories such as brackets or trays may be required to properly install your SSD.

View the manual for the Edge Boost Pro Micro here, for free. This manual comes under the category Solid state drives (SSD) and has been rated by 1 people with an average of a 5.1. This manual is available in the following languages: English. Do you have a question about the Edge Boost Pro Micro or do you need help? Ask your question here

Need help?

Do you have a question about the Edge and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Edge owners to provide you with a good answer.

Number of questions: 0

Boost Pro Micro | PE242411
Solid state drive (SSD)
652977236939, 6529772369398, 652977236953, 6529772369534, 652977242435, 6529772424356, 652977245054, 6529772450546, 0652977242435
Manual (PDF)
SSD capacity60 GB
Interfacemicro SATA
Read speed550 MB/s
Write speed520 MB/s
Memory typeMLC
Data transfer rate6 Gbit/s
Security algorithms256-bit AES
S.M.A.R.T. support
TRIM support
Mean time between failures (MTBF)2000000 h
Windows operating systems supported
SSD form factor1.8"
Other features
Maximum IOPS (Input/Output Operations Per Second)80000
Product colourMetallic
Power consumption (read)3 W
Power consumption (write)3 W
Power consumption (idle)1 W
Operational conditions
Operating temperature (T-T)0 - 70 °C
Storage temperature (T-T)-40 - 85 °C
Operating shock1500 G
Operating vibration3.1 G
Weight & dimensions
Width54 mm
Depth78.5 mm
Height5 mm
Weight45 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Edge Boost Pro Micro below.

Is your question not listed? Ask your question here

No results