Elica Lien Diamond Frame 904 manual
View the manual for the Elica Lien Diamond Frame 904 here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Elica Lien Diamond Frame 904 or do you need help? Ask your question here
Design
| Appliance placement | Built-in |
| Hob type | - |
| Number of cooking zones | 4 zone(s) |
| Number of gas cooking zones | 0 zone(s) |
| Number of electric cooking zones | 4 zone(s) |
| Product colour | Black |
| Top surface type | - |
| Cooking zone 1 power | 2100 W |
| Cooking zone 1 boost | 3700 W |
| Cooking zone 2 power | 2100 W |
| Cooking zone 2 boost | 3700 W |
| Cooking zone 3 power | 2100 W |
| Cooking zone 3 boost | 3700 W |
| Cooking zone 4 power | 2100 W |
| Cooking zone 4 boost | 3700 W |
| Cooking zone 1 type | Large |
| Cooking zone 1 shape | Rectangular |
| Cooking zone 1 position | Left |
| Cooking zone 1 power source | Electric |
| Cooking zone 2 type | Large |
| Cooking zone 2 shape | Rectangular |
| Cooking zone 2 position | Central rear left |
| Cooking zone 2 power source | Electric |
| Cooking zone 3 type | Large |
| Cooking zone 3 shape | Rectangular |
| Cooking zone 3 position | Central rear right |
| Cooking zone 3 power source | Electric |
| Cooking zone 4 type | Large |
| Cooking zone 4 shape | Rectangular |
| Cooking zone 4 position | Right |
| Cooking zone 4 power source | Electric |
Power
| Connected load (electric) | 7400 W |
| Connected load (gas) | 0 W |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
Ergonomics
| Built-in display | No |
| Control type | Touch |
| Residual heat indicator | Yes |
| Timer | Yes |
| Child lock | Yes |
Performance
| Boost function | Yes |
| Pan detection | Yes |
Weight & dimensions
| Width | 900 mm |
| Depth | 410 mm |
| Height | 55 mm |
| Installation compartment width | 880 mm |
| Installation compartment depth | 390 mm |
| Weight | 12000 g |
| Package weight | 14000 g |
| Package depth | 505 mm |
| Package width | 1010 mm |
| Package height | 125 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Elica Lien Diamond Frame 904 below.
What is the weight of the Elica Lien Diamond Frame 904?
The Elica Lien Diamond Frame 904 has a weight of 12000 g.
Can I use my pans on induction?
Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.
How do I reset my induction hob?
Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.
What is a Perilex connection?
A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.
Is cooking on induction dangerous?
No, cooking on induction is not dangerous.
What is the height of the Elica Lien Diamond Frame 904?
The Elica Lien Diamond Frame 904 has a height of 55 mm.
What is the width of the Elica Lien Diamond Frame 904?
The Elica Lien Diamond Frame 904 has a width of 900 mm.
What is the depth of the Elica Lien Diamond Frame 904?
The Elica Lien Diamond Frame 904 has a depth of 410 mm.
Is the manual of the Elica Lien Diamond Frame 904 available in English?
Yes, the manual of the Elica Lien Diamond Frame 904 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Elica and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Elica owners to provide you with a good answer.
Number of questions: 0