EnerGenie Mi Home Click manual

EnerGenie Mi Home Click
7.5 · 1
PDF user manual
 · 1 page
English
user manualEnerGenie Mi Home Click
In the Box:
- MiHome Click
- Battery, Already Fitted (1x CR2450)
- Double Sided Fixing Pad
- User Guide
Available Functions
- Single Click
- Double Click
- Long Click
Connecting the Battery
Before the MiHome Click is used for the first time, remove
the battery cover (2) on the MiHome Click (if fitted) by
carefully sliding apart, and remove the plastic tab (6).
Pairing via a Browser
1. Log into your MiHome account at mihome4u.co.uk.
2. Select Pair New Device from the mihome4u.co.uk/devices
3. Select the Click, followed by Pair Device and then follow
the onscreen pairing instructions, pressing the pairing button
(3) for 5-6 seconds when required. The pairing LED which
can be seen through the pairing LED view slot (9) will flash
up to 5 times to indicate pairing mode.
4. Check the MiHome Click is now visible in the device list,
if not, repeat steps 2 and 3 as above.
Installation
1. Remove covering from one side of fixing pad, and fix into
square recess on rear of battery cover.
2. Mount the MiHome Click to desired location by removing
remaining covering from fixing pad and pressing into place.
Note: Before fixing into place, ensure that MiHome Click
communicates with the MiHome Gateway in the desired
position, and that the fixing location is clean and dry.

Mi Home Click

Quick Start Guide

The MiHome Click is part of the MiHome home
automation range. This allows you to set three user
defined configurable actions per MiHome Click device,
enabling you to control other compatible MiHome devices.
1 – MiHome Click 5 – Battery
2 – Battery cover 6 – Plastic tab
3 – Pairing button 7 – Locating tab
4 – Battery latch 8 – Pairing LED view
Pairing with the MiHome Gateway
Your MiHome Click needs to be paired with the MiHome
Gateway before it can be used. You must pair your
MiHome Click with the MiHome Gateway before installing
it. Please ensure that your device is in range of the Gateway
when you pair it. We suggest up to 10 metres, unobscured
by furniture or walls etc.
Safety
If you do not install and use in line with this guide the
warranty will become invalidated and we will not be liable
for any damage or loss whatsoever, including indirect loss,
damage to property or personal injury. You must only use
the product in dry areas indoors, and it must be protected
from moisture and water. Do not disassemble, other than
as described in the installation section of this user guide,
as it does not contain any parts to service. If it arrives faulty,
return it to where you bought it. Your statutory rights are not
aected
Copyright Notice
© 2017 Sandal Plc.
User Manual
Part no: MIHO089
Energenie and MiHome are brand names of Sandal Plc.
Oxon, OX26 6BW
Further Help
For more help, look online at
mihome4u.co.uk/troubleshooting and
www.energenie4u.co.uk where you can download a more
comprehensive user manual, or contact our helpful support
team in the UK via 08000 469 466 or
support@mihome4u.co.uk
Further contact methods can be found at:
https://energenie4u.co.uk/about_us/contact_us
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Sandal Plc, T/a Energenie declares that the radio
equipment type MIHO089 MiHome Multi Sensor is in
compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following
internet address: www.energenie4u.co.uk
Pairing via the App on your Smartphone
1. Log into your MiHome account on the MiHome App
(App available free on iOS or Google Play Store)
2. Select Add a new device from menu and choose Click.
3. Follow onscreen pairing instructions, pressing the
pairing button (3) for 5-6 seconds when required. The
pairing LED which can be seen through the pairing LED
view slot (9) will flash up to 5 times to indicate pairing mode.
4. Check the MiHome Click is now visible in the device list,
if not, repeat steps 2 and 3 as above.
1 2
3
4
5
6
7
8
WARNING: NOT
SUITABLE FOR
CHILDREN
UNDER 36
MONTHS

View the manual for the EnerGenie Mi Home Click here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the EnerGenie Mi Home Click or do you need help? Ask your question here

Need help?

Do you have a question about the EnerGenie and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other EnerGenie owners to provide you with a good answer.

Number of questions: 0

General
EnerGenie
Mi Home Click | MIHO089
smart home
English
Manual (PDF)
Power
Power sourceBattery
Battery typeCR2450
Number of batteries supported1
Features
Operating frequency434.3 MHz
Maximum outdoor range60 m
Connectivity technologyWireless
Wireless technology-
Product colourWhite
Operational conditions
Operating temperature (T-T)-20 - 40 °C
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the EnerGenie Mi Home Click below.

Is your question not listed? Ask your question here

No results