Il telecomando a raggi infrarossi GW 90 791 funge da apparecchio di
comando per la pulsantiera multifunzione GW 90 792. I comandi ad
infrarossi sono tradotti nei relativi telegrammi dati.
Con il telecomando a raggi infrarossi è possibile trasmettere 10 differenti
canali infrarossi.
Ciascun canale ad infrarossi è selezionabile sul telecomando a raggi infrarossi.
A seconda del parametraggio è possibile richiamare liberamente le funzioni
di commutazione, dei fronti, di attenuazione luci e delle tapparelle per
ciascun canale ad infrarossi con il BUS EIB.
MONTAGGIO
Inserimento delle batterie
Il telecomando GW 90 791 richiede due batterie del tipo LR 03 1,5V. Queste
non sono comprese nella fornitura.
Aprire il coperchio del vano batterie sul retro del telecomando premendo
lateralmente.
Introdurre le batterie nel vano batterie come indicato dal simbolo. Fare
attenzione alla corretta polarità.
Richiudere il coperchio del vano batterie.
Sostituzione delle batterie
Nel caso non dovesse accendersi il LED come consueto quando si preme il
pulsante, è necessario sostituire le batterie.
Sostituire le batterie entro breve tempo.
DATI TECNICI
Numero canali:
10 (canale 1-canale 10)
Elementi di visualizzazione:
Il LED rosso si accende brevemente alla trasmissione
Elementi di azionamento:
10 pulsanti canale
Batterie:
2 x LR 03 1,5 V (non sono comprese nella fornitura)
Raggio d’azione:
circa 20m.
Colour
black
Article no.
GW 90 791
FUNCTION
The GW 90 791 infrared ray remote control acts as a control device for the
multifunction push button GW 90 792. The infrared commands are
translated into relative data telegrams.
Ten different infrared channels can be transmitted with the infrared ray
remote control.
Each infrared channel can be selected on the infrared ray remote control.
Depending on the parameters it is possible to freely call the functions for
switching, edges, light dimming and roller shutters for each infrared
channel with the EIB BUS.
ASSEMBLY
Loading the batteries
The GW 90 791 remote control requires two LR 03 1.5V batteries. These are
not included in the supply.
Open the battery compartment cover on the back of the remote control by
pressing sideways.
Load the batteries into the battery compartment as shown in the symbol.
Take care over the correct polarity.
Close the battery compartment cover.
Battery replacement
The batteries must be replaced if the LED does not light up as usual when
the button is pressed.
Replace the batteries as soon as possible.
TECHNICAL DATA
Number of channels:
10 (channel 1-channel 10)
Display elements:
The red LED lights up briefly on transmission
Actuation elements:
10 button channels
Batteries:
2 x LR 03 1.5 V (not included in the supply)
Detection area:
about 20m.
GB
+39 035 946 111
8.30 - 12.30 / 14.00 - 18.00
lunedì ÷ venerdì - monday ÷ friday
+39 035 946 260
sat@gewiss.com
www.gewiss.com
24h
Ai sensi dell’articolo 9 comma 2 della Direttiva Europea 2004/108/CE si informa che responsabile dell’immissione del prodotto sul mercato Comunitario è:
According to article 9 paragraph 2 of the European Directive 2004/108/EC, the responsible for placing the apparatus on the Community market is:
GEWISS S.p.A Via A. Volta, 1 - 24069 Cenate Sotto (BG) Italy Tel: +39 035 946 111 Fax: +39 035 945 270 E-mail: qualitymarks@gewiss.com
View the manual for the Gewiss GW90791 here, for free. This manual comes under the category remote controllers and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Gewiss GW90791 or do you need help? Ask your question here
Need help?
Do you have a question about the Gewiss and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Gewiss owners to provide you with a good answer.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Gewiss GW90791 below.
What is the weight of the Gewiss GW90791?
The Gewiss GW90791 has a weight of - g.
A battery in my remote controller has started to corrode. Is the device still safe to use?
The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.
Is the manual of the Gewiss GW90791 available in English?
Unfortunately, we do not have the manual for the Gewiss GW90791 available in English. This manual is available in English.
Need help?
Do you have a question about the Gewiss and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Gewiss owners to provide you with a good answer.
Number of questions: 0