Holzmann TK255 manual
View the manual for the Holzmann TK255 here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Holzmann TK255 or do you need help? Ask your question here
- 2 SICHERHEITSZEICHEN / SAFETY SIGNS 4
- 3 ILLUSTRATION 6
- 4 VORWORT (DE) 10
- 5 TECHNIK 11
- 5.1 Komponenten
- 5.2 Technische Daten
- 6 SICHERHEIT 12
- 6.1 Bestimmungsmäßige Verwendung
- 6.2 Sicherheitshinweise
- 6.3 Restrisiken
- 7 MONTAGE 15
- 7.1 Handrad (Fig.5)
- 7.2 Spaltkeil (Fig.6/7/8)
- 7.3 Sägeblattschutz (Fig.9)
- 7.4 Untergestell TK 255MS (optional)
- 7.5 Elektrischer Anschluss
- 8 BETRIEB 17
- 8.1 Betriebshinweise
- 8.2 Bedienung
- 8.2.1 Ein/Aus Schalter
- 8.2.2 Schnitthöhe (Fig.11)
- 8.2.3 Winkel (Fig.11)
- 8.2.4 Parallelanschlag (Fig.12/13)
- 8.2.5 Tischerweiterung (Fig.15)
- 8.2.6 Winkelanschlag (Fig.16)
- 8.2.7 Überlastschutz (Fig.3)
- 8.2.8 Stauplätze (Fig. 21/22/23)
- 9 WARTUNG 19
- 9.1 Wechseln des Sägeblattes (Fig. 6/9/10)
- 9.2 Instandhaltung- und Wartungsplan
- 9.3 Reinigung
- 9.4 Lagerung
- 9.5 Entsorgung
- 10 FEHLERBEHEBUNG 20
- 12 PREFACE (EN) 21
- 13 TECHNIC 22
- 13.1 Components
- 13.2 Technical details
- 14 SAFETY 23
- 14.1 Intended Use
- 14.2 Security instructions
- 14.3 Remaining risk factors
- 15 ASSEMBLY 26
- 15.1 Hand wheel (Fig.5)
- 15.2 Riving knife (Fig.6/7/8)
- 15.3 Saw blade (Fig.9)
- 15.4 Stand TK 255MS (optional)
- 15.5 Power supply
- 16 OPERATION 28
- 16.1 Operation instructions
- 16.2 Operation
- 16.2.1 ON/OFF switch
- 16.2.2 Cutting height (Fig.11)
- 16.2.3 Angle (Fig.11)
- 16.2.4 Rip fence (Fig.12/13)
- 16.2.5 Table extension (Fig.15)
- 16.2.6 Angle stop (Fig.16)
- 16.2.7 Overload protection (Fig.3)
- 16.2.8 Auxiliary tools stored (Fig. 21/22/23)
- 17 MAINTENANCE 30
- 17.1 Changing of the saw blade
- 17.2 Maintenance plan
- 17.3 Cleaning
- 17.4 Storage
- 17.5 Disposal
- 18 TROUBLE SHOOTING 31
- 19 ERSATZTEILE / SPARE PARTS 32
- 19.1 Ersatzteilbestellung / spare parts order
- 19.2 Explosionszeichnung / explosion drawing
- 20 EG-KONFORMITÄTSERKLÄRUNG/CE-CERTIFICATE OF CONFORMITY 38
- 21 GARANTIEERKLÄRUNG 39
- 22 GUARANTEE TERMS 40
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Holzmann TK255 below.
What is the best way to clean my saw blade?
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
My saw blade is blunt. What now?
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
How do I remove rust from my Holzmann saw?
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
What does '16V' or '20V' mean?
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
Do I have to wear hearing protection when using a saw?
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
Is the manual of the Holzmann TK255 available in English?
Yes, the manual of the Holzmann TK255 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Holzmann and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Holzmann owners to provide you with a good answer.
Number of questions: 0