View the manual for the Honeywell RTH230B here, for free. This manual comes under the category thermostat and has been rated by 2 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell RTH230B or do you need help? Ask your question here
The Honeywell RTH230B is a programmable thermostat that allows users to set customized temperature schedules for their home. With a clear and easy-to-read display, the thermostat is user-friendly and simple to operate. It includes features such as a backlit display, filter change reminder, and battery replacement reminder to ensure that it is always in optimal condition. The thermostat is compatible with most heating and cooling systems, including electric, gas, and oil systems, as well as 2-wire heat-only systems. It also features a precise temperature control with a range of 40°F to 90°F. One of the standout features of the Honeywell RTH230B is its programming capabilities. Users can program up to four different time periods per day with different temperature settings for each. This allows for customized temperature control throughout the day, saving energy and money on utility bills. The thermostat can also be manually adjusted for temporary temperature changes, such as when leaving the house for the day or heading to bed at night. Overall, the Honeywell RTH230B is a reliable and efficient thermostat that offers customizable temperature control for any home.
| Brand | Honeywell |
| Model | RTH230B |
| Product | thermostats |
| Language | English |
| Filetype | Manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell RTH230B below.
The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.
If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
Please ensure that the thermostat is securely connected to the power supply and that the circuit breaker is not tripped. Additionally, verify that the batteries are properly installed and functional.
To adjust the temperature settings, press the up or down arrow buttons on your thermostat until the desired temperature is displayed.
Make sure that the thermostat is set to the desired mode (heat/cool), and the temperature is set higher/lower than the current room temperature accordingly. Also, check if the heating/cooling system's power switch is turned on and any relevant breakers or fuses are functioning correctly.
Unfortunately, this model does not have programmable features. You would need a different thermostat model with programmable capabilities to set different temperature schedules.
At the bottom of your thermostat, locate the battery door. Open it, remove the old batteries, and insert new AA batteries, ensuring correct polarity. Close the battery door, and the thermostat should start functioning with the new batteries.
Yes, the manual of the Honeywell RTH230B is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Honeywell and is the answer not in the manual?
Question and answer
Number of questions: 2How do I change heat setting
Change f to c