Name: Hooker 638-75006
Brand: Hooker
SKU: 1671930
Rating: 79 (1 reviews)

user manualHooker 638-75006

1/2

ASSEMBLY INSTRUCTION

Item#:638-75006 Brynlee Side Chair/2per ctn

** Please make sure you have all parts indicated below prior to assembly.

Assembly Steps:

There are two K/D chairs in one box. Please follow numbers on one chair and letters on the other chair

during assembly.

1. Place back frame (G) on a clean surface.

2. Tighten seat frame(I) to the back legs of frame(G) by using bolt(C), lock washer(B) and flat

washer(A) at the center location (see diagram 2). Then, tighten seat frame (I) to back legs of frame

(G) using bolts (E), lock washers (B) and flat washers (A) at corner blocks. (See diagram 1)

3. Install front legs (F) onto seat frame (I) using bolts (C), lock washers (B), flat washers (A). Tighten

all bolts by hand. (See diagram 2)

4. After all bolts are attached and hand tightened, turn the chair upright.

5. Level the chair following the “chair leveling instruction” as below.

6. Make sure the chair is level and then tighten all bolts completely by using the allen wrench (D).

DIAGRAM 1

DIAGRAM 2

View the manual for the Hooker 638-75006 here, for free. This manual comes under the category chairs and has been rated by 1 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Hooker 638-75006 or do you need help? Ask your question here

Need help?

Do you have a question about the Hooker and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Hooker owners to provide you with a good answer.

Number of questions: 0