HP W2448HC manual

HP W2448HC
  • Number of pages: 56
  • Filetype: PDF
Technical Specifications
B–12 User’s Guide

LCD Monitor Quality and Pixel Policy

The HP LCD Monitor uses high-precision technology, manufactured according to high standards, to help guarantee
trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or
dark spots. This is common to all LCD displays used in products supplied by all vendors and is not specific to the
HP LCD Monitor. These imperfections are caused by one or more defective pixels or subpixels.
A pixel consists of one red, one green, and one blue subpixel.
A defective whole pixel is always turned on (a bright spot on a dark background), or it is always off (a dark spot
on a bright background). The first is the more visible of the two.
A defective subpixel (dot defect) is less visible than a defective whole pixel, and is small and only visible on a
specific background.
To locate defective pixels, the monitor should be viewed under normal operating conditions and in normal operating
mode at a supported resolution and refresh rate, from a distance of approximately 50 cm (16 inches).
We expect that, over time, the industry will continue to improve its ability to produce displays with fewer cosmetic
imperfections, and we will adjust guidelines as improvements are made.
For more information about your HP LCD Monitor, refer to the HP Web site at: http://www.hp.com/support

Power Cord Set Requirements

The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate
on input voltages between 100–240V
v, 50/60 Hz, 1.5A.
The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the
country/region where you purchased the equipment.
If you need to obtain a power cord for a different country/region, you should purchase a power cord that is
approved for use in that country/region.
The power cord must be rated for the product and for the voltage and current marked on the product’s electrical
ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked
on the product. In addition, the cross-sectional area of the wire must be a minimum of 0.75 mm
or 18AWG, and the
length of the cord must be between 4.94 ft. (1.5 m) and 12 ft. (3.6 m). If you have questions about the type of power
cord to use, contact your HP-authorized service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against
it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the
HP W2448HC

Need help?

Number of questions: 0

Do you have a question about the HP W2448HC or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other HP W2448HC owners to properly answer your question.


View the manual for the HP W2448HC here, for free. This manual comes under the category Monitors and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the HP W2448HC or do you need help? Ask your question here

HP W2448HC specifications

Intuitive touchscreen technology lets you control your PC right from the screen. And the vibrant 1980 x 1200 resolution ...
Easily connect with the convenient DVI port for stunning HD visuals through a high quality and reliable digital connecti...
With both DVI and HDMI ports this display is ready to connect for brilliant HD visuals over a smooth digital connection....
No need to buy external speakers for great audio.  With integrated speakers this display is ready to go once you’re conn...
With a great webcam it’s never been easier to stay in touch and get your work done. Video chat with the family with clea...
The display is equipped with standard VESA mounting for showcasing on a wall or swivel arm.
Gas piston design allows 130mm of smooth, precise height adjustment so your display is always in the most comfortable po...
Brand HP
Model W2448HC
Product Monitor
Language English
Filetype PDF
Display diagonal 24 "
Response time 3 ms
Display brightness (typical) 400 cd/m²
Display resolution 1920 x 1200 pixels
Contrast ratio (typical) 1000:1
Contrast ratio (dynamic) 3000:1
Viewing angle, horizontal 160 °
Viewing angle, vertical 160 °
Display number of colours -
Pixel pitch 0.270 x 0.270 mm
Horizontal scan range 24 - 94 kHz
Vertical scan range 48 - 85 Hz
Aspect ratio 16:10
HD type Full HD
Supported graphics resolutions 1920 x 1200 (WUXGA)
Native aspect ratio 16:10
Other features
Display LCD
TV tuner integrated
Ports & interfaces
VGA (D-Sub) ports quantity 1
DVI-D ports quantity 1
DVI-I ports quantity 0
HDMI ports quantity 1
USB Type-A downstream ports quantity 3
AC (power) in
USB hub version 2.0
Built-in speaker(s)
Number of speakers 2
RMS rated power 6 W
Built-in camera
Built-in microphone
Plug and Play
VESA mounting
Panel mounting interface 100 x 100 mm
Swivel angle range 0 - 25 °
Height adjustment 850 mm
Height adjustment
Cable lock slot
Cable lock slot type Kensington
Thin Client
Thin client installed -
Power consumption (standby) 2 W
Power consumption (typical) 130 W
Weight & dimensions
Width (without stand) 586 mm
Depth (without stand) 289 mm
Height (without stand) 500 mm
Weight (without stand) 9800 g
Operational conditions
Operating temperature (T-T) 5 - 35 °C
Operating relative humidity (H-H) 20 - 80 %
Sustainability certificates ENERGY STAR
Certification 9241-3,7,8 VDT, ISO 13406-2, MPR-II, CISPR, VCCI, CE, FCC, UL, GOST, SABS, BNCI, SEMKO
Product colour Black
Market positioning -
Country of origin China
show more

Questions & answers

Below, you will find customer questions and answers about the HP W2448HC.

Is your question not listed? Ask your question here