Name: Ikelite 6320
Brand: Ikelite
SKU: 1436720
Rating: 75 (1 reviews)

user manualIkelite 6320

The Ikelite Pro-V8 LED Video Lite uses

the most sophisticated LED technology

currently available to deliver a level of

performance previously unavailable in a

light of this size. Three 5-watt LEDs provide

a shockingly bright, even beam for 10 hours

or more with no waning effect. The light

runs cool and is usable above or below

water with the same intensity for the same

burn time.

The rear clamp design assures easy

opening and dependable resealing. Virtually

indestructible casing. Rubber shroud

protects the front lens while blocking side

reflections. Large rotating switch and

sliding lock afford easy operation even

when wearing a bulky glove. Nickel-plated

brass contacts boost the electrical efficiency

and corrosion resistance. Waterproof to

90m (300 feet).

PPRROO--VV88

LLEEDD

VVIIDDEEOO LLIITTEE

##66332200

22

NNOOTTEESS::

LLEEDD BBuullbbss

Due to the extended life expectancy of LED bulbs, the light head assembly has been factory

sealed. If bulb failure does occur, the light should be returned to Ikelite.

LLEEDD''ss FFlliicckkeerr

When the batteries are nearly depleted the light will flicker, if left on for a few minutes the

flickering will stop, but each time the light is turned off and on the light will flicker. This is a good

indication that the batteries should be replaced.

FFlleexx AArrmm PPoopp--BBeeaaddss

Your Pro-V8 Flex Arm utilizes a pop-bead system which allows easy repositioning of the Pro-V8 Lite

while underwater. The pop-beads are designed to allow nearly effortless lite repositioning during a

dive. On land, the pop-beads may not support the full weight of the Pro-V8 lite with batteries

installed. Also, after extended use, the pop-beads will loosen slightly. This should not be a problem

underwater, however replacement pop-beads are avialable for purchase: #9350.44 (4 pop-bead

extension).

OOnn//OOffff SSwwiittcchh

FFlleexx AArrmm

The unique flip-lock lever makes opening and closing

incredibly easy and dependable.

Simply extend the locking lever, flip it up, and rotate.

The internal spring automatically pushes open the light for

easy battery replacement. Flip the locking lever down and

the Pro-V8 seals with ease and confidence.

• Place light face down on flat surface.

• Pull out on the locking lever.

• Flip the lever up.

• Rotate the lever counter-clockwise 90° and the internal

spring automatically pushes the light Open.

• Lift the body off of the front. The batteries remain

housed in the holder.

OO--RRIINNGG________________________________________________________________________________________________________________________________________

Keep the o-ring and sealing surfaces clean. DO NOT stretch the o-ring when cleaning. It is not

necessary to lubricate the o-ring. Never use spray lubricant because it will crack the plastic.

Place the clean o-ring on the inner recess of the front head assembly.

Do not dent or damage the front edge of the lite body as the o-ring seals against this surface.

CCLLOOSSIINNGG TTHHEE PPrroo--VV88 LLIITTEE______________________________________________________________________________________________________

• Make sure the on/off switch has been rotated left to the off position.

• Place the front lens face down on a flat surface. Check that the o-ring and sealing surfaces are

clean and undamaged; make sure the o-ring is positioned properly on the inner recess of the front.

• Place locking lever in the open position (pull out, flip up, and rotate lever).

• Align the handle on the body with the handle reference on the battery holder. Lower the body

over the batteries. Proper alignment of the body with the front is extremely important to avoid

possible damage to the internal components.

• To seal the light, simply reverse the opening sequence. Press down

slightly on the body and rotate the lever clockwise. Push the lever down

and slide the lever in to the locked position.

OONN//OOFFFF SSWWIITTCCHH________________________________________________________________________________

The large rotating switch with sliding lock is easily operated with one

hand. Unlock the switch by sliding the white-colored lock down. Rotate

the switch fully to the right to turn the light ON.

Rotate the switch to the left to turn the light OFF. To lock the switch,

slide the white lock upward towards the light body. Lock the switch when

the light is not in use.

BBAATTTTEERRYY IINNSSTTAALLLLAATTIIOONN________________________________________________________________

Accepts eight C-cell batteries, alkaline or NMHi. Alkaline batteries

provide 15W initial intensity and 10 hours of high intensity light.

• Note the polarity markings at the base of the battery holder assembly.

• Follow the polarity markings when installing two batteries in each

of the four columns. Make sure that both batteries in each column have

the same polarity direction.

FOR BEST RESULTS, USE

QUALITY ALKALINE BATTERIES

ENERGIZER

o-ring

RCD

UNL

OCK

RCD

UNL

OCK

OPENING THE LITE

ull Out

Flip Up Rotate

User manual

View the manual for the Ikelite 6320 here, for free. This manual comes under the category Lighting and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Ikelite 6320 or do you need help? Ask your question here

Need help?

Do you have a question about the Ikelite and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Samsung Galaxy A7 owners to provide you with a good answer.

Number of questions: 0