Inverto IDLB-QUDL24-MULTI-OPP manual

9.4 · 1
PDF user manual
 · 2 pages
user manualInverto IDLB-QUDL24-MULTI-OPP


Dielectric feed Quad LNB


Item: 3627

This innovative LNB was specifically designed for installations that make use of several LNBs on a satellite dish antenna. It’s novel
slim feed technology incorporating advanced dielectric materials and optimum front end design ensure maximum energy transfer
from the dish to the LNB circuits also when the LNB position is off the focal point. Further more, it’s long neck allows placing the
LNBs closely next to each other and gain access to satellites typically too close in their orbital position to be received with standard
neck LNBs on a certain satellite dish antenna. This LNB enables the reception of signal from one satellite and its distribution to up-to
4 single tuner Set-top boxes (or 2 in the case of a twin-tuner STB).
Main Features:
• Novel slim feed technology
• Low Phase Noise, DVB-S2 (HDTV) compliant
• Low Noise Figure
• Low power consumption
• High Cross-Pole performance
• High Frequency stability
Click object to rotate

View the manual for the Inverto IDLB-QUDL24-MULTI-OPP here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the Inverto IDLB-QUDL24-MULTI-OPP or do you need help? Ask your question here

Need help?

Do you have a question about the Inverto and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Inverto owners to provide you with a good answer.

Number of questions: 0

not categorized
Manual (PDF)
Technical details
Input frequency range10.7 - 12.75 GHz
Output frequency range950 - 2150 MHz
Noise figure0.2 dB
Low band input frequency range10.7 - 11.7 GHz
High band input frequency range11.7 - 12.75 GHz
Low band LO frequency9.75 GHz
High band output frequency range1100 - 2150 MHz
Low band output frequency range950 - 1950 MHz
High band LO frequency10.6 GHz
Conversion gain60 dB
Voltage Standing Wave Ratio (VSWR)2.0:1
Output impedance75 Ω
Image rejection40 dBmW
Spurious emission-60 dBmW
Local Oscillator (LO) phase noise (10 kHz)-90 dBc/Hz
Temperature drift (±)3 MHz
Initial accuracy (±)1 MHz
Gain ripple (±)0.75 dB
Control signal Cc (band switching)22 kHz
Supply voltage Ca (vertical polarization)11 - 14 V
Supply voltage Cb (horizontal polarization)16 - 20 V
Cross-polarization isolation22 dB
Compression point (1 dB)0 dBmW
Power consumption200 mA
Weight & dimensions
Feedhorn diameter23 mm
Width173 mm
Height132 mm
Weight344 g
Product colourBlack, White
Ports & interfaces
RF connector typeF
Operational conditions
Operating temperature (T-T)-30 - 60 °C
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Inverto IDLB-QUDL24-MULTI-OPP below.

What is the weight of the Inverto IDLB-QUDL24-MULTI-OPP?

The Inverto IDLB-QUDL24-MULTI-OPP has a weight of 344 g.

What is the height of the Inverto IDLB-QUDL24-MULTI-OPP?

The Inverto IDLB-QUDL24-MULTI-OPP has a height of 132 mm.

What is the width of the Inverto IDLB-QUDL24-MULTI-OPP?

The Inverto IDLB-QUDL24-MULTI-OPP has a width of 173 mm.

Is the manual of the Inverto IDLB-QUDL24-MULTI-OPP available in English?

Yes, the manual of the Inverto IDLB-QUDL24-MULTI-OPP is available in English .

Is your question not listed? Ask your question here

No results