View the manual for the Junkers WR 11-2 B here, for free. This manual comes under the category water heaters & boilers and has been rated by 289 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Junkers WR 11-2 B or do you need help? Ask your question here


The Junkers WR 11-2 B is an indoor tankless water heater and boiler system that operates on methane gas. It has a vertical placement support and a gas exhaust diameter of 110 millimeters. This specific unit has a domestic hot water flow rate of 11 liters per minute, with a minimum pressure of 0.1 bar. It has a range of power capacities with a minimum of 7000 watts and a maximum of 19200 watts. The system is designed with a solo boiler system, which means that it can heat water on demand without the need for a storage tank. The Junkers WR 11-2 B is constructed with premium materials and built for long-lasting reliability and durability. It has an International Protection (IP) code of IPX4D which means it is protected against water splashing from any direction and is safe for installation in a bathroom. Additionally, it has support for solar batteries, which means it can be used in conjunction with a solar power system to reduce energy consumption. In summary, the Junkers WR 11-2 B is an indoor tankless water heater and boiler system that operates on methane gas with a domestic hot water flow rate of 11 liters per minute. It has a range of power capacities, a solo boiler system, and vertical placement support. The product is designed with reliability and durability in mind, and features an IP rating of IPX4D, as well as the capability to support solar batteries.
| Brand | Junkers |
| Model | WR 11-2 B | 7701331627 |
| Product | water heater & boiler |
| EAN | 4047416115351 |
| Language | English |
| Filetype | Manual (PDF) |
| Type | Tankless (instantaneous) |
| Boiler system | Solo boiler system |
| Heater location | Indoor |
| Placement supported | Vertical |
| Product colour | White |
| Gas exhaust diameter | 110 mm |
| Solar batteries support | Yes |
| International Protection (IP) code | IPX4D |
| Fuel type | Methane |
| Boiler type (NL label) | - |
| Input connection type | G 1/2 |
| Domestic Hot Water (DHW) flow | 11 l/min |
| Minimum power | 7000 W |
| Maximum power | 19200 W |
| Minimum operating pressure | 0.1 bar |
| Maximum operating pressure | - bar |
| Adjustable thermostat | Yes |
| Width | 310 mm |
| Depth | 220 mm |
| Height | 580 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Junkers WR 11-2 B below.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
The Junkers WR 11-2 B has a height of 580 mm.
The Junkers WR 11-2 B has a width of 310 mm.
The Junkers WR 11-2 B has a depth of 220 mm.
Yes, the manual of the Junkers WR 11-2 B is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Junkers and is the answer not in the manual?
Question and answer
Number of questions: 5Good afternoon I have a Junkers water heater and boiler that turns off when we turn on the hot water, and the display shows F7. Can someone help me?
This message has been automatically translatedHow to know if the pressure of the boiler is 0 and how to increase or do it? Thank you.
Hello, we have put in new batteries, a new cylinder and when we open the tap the water heater does nothing and the water comes out cold, what could be the problem?
The water heater turns on, blinks at 17/18, the red light is on, and it shows the EA code. There is no hot water. Can you help?
I have a gas water heater WR11-2B. Every time I take a shower it turns off, it doesn't last more than two minutes and I have to close and reopen the mixer. Can you kindly tell me the cause? Thank you.
This message has been automatically translated