Koubachi Wifi Plant Sensor manual

Koubachi Wifi Plant Sensor
(1)
  • Number of pages: 1
  • Filetype: PDF
Short
click
For further information go to:
http://www.koubachi.com/features/sensor

Sensor Button

LED
Click for
> 10 seconds
Click for
> 3 seconds
Measure and
transmit data
Configuration
go.koubachi.com
If no Wi-Fi signal is
available the sensor starts
pulsating red
Reset
network
settings
Green
Orange
Red

System requirements

•Internet connection through Wi-Fi (802.11 b/g)
•Wi-Fi reception at the location of the plant
•For conguration: A computer or an iOS device with Wi-Fi
receiver
The following systems are supported for conguration
•Microsoft: Windows XP, Windows Vista, Windows 7
•Apple: Mac OS X 10.6.8 or later, iOS 4 or later
•Linux: The Wi-Fi adapter must support ad-hoc.
Perfect eciency with non specied systems cannot be guaranteed.

Quick start guide

This Quick start guide provides additional instructions
for startup. Before starting, we recommend to read the
instructions on http://www.koubachi.com/support
The product fullls according to the conformity declaration
the guidelines 2004/108/EU, ES 60950 and ES 301489-1.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1) This device may not cause harmful interference, and 2)
this device must accept any interference received, including
interference that may cause undesired operation.

Package content

Wi-Fi Plant Sensor
2x AA-Batteries
Quick start guide

Configuration over Wi-Fi

To start the conguration make sure all mentioned system
requirements are fullled.
1) Go to http://go.koubachi.com and follow the instruc-
tions.
2) Insert batteries.
3) After completing the conguration, insert the sensor
into the soil near your plant.

How it works

The Wi-Fi plant sensor measures soil moisture, light
intensity, and the ambient temperature. Measurements are
transmitted wirelessly to the Koubachi server for further
processing. These are the measurement ranges and values:

Care instructions

The Koubachi Wi-Fi Plant Sensor is generally maintenance
free. With little care, it will be the best companion for your
plant care.
Cleaning: the Sensor tip can be cleaned with a moist cloth,
e.g. when you relocate the sensor to another plant. Do not
use detergents or oil containing substances for cleaning.
The sensor tip must only be cleaned with pure water.
Battery replacement: Normally, the lifespan of the batteries is
approximately 1.5 years. When you replace the batteries, take
care that you close the battery compartment rmly, before
tightening the battery screw. That way, the compartment
remains watertight. Always use two fresh disposable batteries.
Use high quality disposable AA batteries. We recommend
Duracell PLUS or Panasonic Pro Power batteries.
Measurement range of soil moisture :
Resolution of soil moisture :
Measurement range of light intensity :
Resolution of light intensity :
Measurement range of ambient temperature :
Resolution of ambient temperature :
1-6000 mBar
5 mBar
0-200 kLux
5 Lux
-20°–50° C / 0°–120° F
1.8° C / 3,2° F
©2012 Koubachi AG. All rights reserved.
The Koubachi logo is a registered trademark of Koubachi AG.

Tested with the following systems

Use of the Sensor Button

EN

Warranty

When used according to the intended use, you have 24
months warranty from the date of purchase on material and
manufacturing defects. A detailed warranty description can
be found on http://www.koubachi.com/warranty

Safety instructions

•Use the Koubachi Wi-Fi Plant Sensor only indoors.
•Avoid plugging the Koubachi Wi-Fi Plant Sensor into hard
ground, and if necessary loosen the soil with a spade.
•Do not immerge the sensor in water.
•Do not drop the sensor on hard surfaces, such as tables or
concrete oors.
•Use the product only according to its intended use and
within the range of the denoted technical parameters. Do
not use force.
•Never use the device on or near conducting current com-
ponents.
•Only perform maintenance and repair work on this device as
instructed in the operation manual. Adhere strictly to the de-
scribed action steps. Use only original Koubachi spare parts.
•Dispose used batteries according to legal regulations.
•At the end of its lifespan, dispose the product according to
the separated refusal collection regulations for electric and
electronic devices (according to local regulations) or return
the product to Koubachi.
Koubachi Wifi Plant Sensor

Need help?

Number of questions: 0

Do you have a question about the Koubachi Wifi Plant Sensor or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Koubachi Wifi Plant Sensor owners to properly answer your question.

View the manual for the Koubachi Wifi Plant Sensor here, for free. This manual comes under the category Bike Trainer Accessories and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Koubachi Wifi Plant Sensor or do you need help? Ask your question here

Koubachi Wifi Plant Sensor specifications

General
Brand Koubachi
Model Wifi Plant Sensor
Product Bike Trainer Accessory
EAN 7629999012431
Language English
Filetype PDF

Questions & answers

Below, you will find customer questions and answers about the Koubachi Wifi Plant Sensor.

Is your question not listed? Ask your question here