TM250IM addendum GB_FR size : 110mm W x 179mm HTM250IM addendum ES size : 110mm W x 179mm H
English
PLEASE FOLLOW THESE PRELIMINARY STEPS.
Before starting up this unit, please remove the protective film from the screen, pulling the
tab located at the top left corner.
Slide towards the right the battery compartment lock located at the back of the unit,
Slide down the battery compartment cover as shown, and remove it from the unit,
Insert the 2 AAA type batteries being supplied, observing the polarity as indicated inside the
battery compartment of he unit. Refit the cover by sliding it upwards. Be careful to guide it in
place right from the beginning. Slide the lock of the battery compartment at the back of the
unit towards the left in order to secure it. Please observe this procedure to replace the
batteries once they are dead.
When using this equipment for the first time, you will need to reset the unit:
1. Insert the tip of a thin pointy object through the hole marked with the word “RESET” at the
back of the unit, an hourglass will appear on the screen, and then the message
“Performing memory Management” will show.
2. The calibration screen will be displayed: The message ”Use stylus to tap center to target”
will show on the screen.
3. Pull out the stylus located at the back of the unit (Top left).
4. Press the centre of the crosses: you must press at least the centre of 3 crosses. The
message “Clear data?” will show on the screen.
5. Reset the unit by selecting “Yes” on the screen with the stylus.
The unit will then ask you if you really want to reset it. Select “Yes” on the screen. The
message “System Reset” will show on the screen, this can take several minutes, please
be patient.
6. Once the process is finished, the screen returns automatically to the main menu.
SYNCHRONISATION
The synchronisation function allows you to transfer shared data such as your agenda, your
“to do” list, your appointment list, etc, between:
• Syncman and your organiser,
• Syncman and the iServer.
Syncman can also synchronise data from Outlook 2000 and Lotus Notes.
Français
BIEN COMMENCER
Avant de démarrer, veuillez retirer la pellicule statique qui protège l’écran à l’aide la
languette en haut à gauche.
Faites coulisser vers la droite le verrou du compartiment à piles au dos de l'appareil.
Faites coulisser la trappe du compartiment à piles vers le bas comme indiqué et retirez-la.
Insérez les 2 piles AAA fournies, en respectant leur polarité comme indiqué dans le
compartiment de l'appareil. Replacez la trappe en la faisant coulisser vers le haut, en
prenant soin d’amorcer sa mise en place dès le début de celle-ci. Faites coulisser vers la
gauche le verrou du compartiment à piles au dos de l'appareil pour le verrouiller. Respectez
cette procédure pour changer les piles lorsqu’elles sont usagées.
Lors de la première utilisation, réinitialisez l’appareil :
1. Insérez une pointe fine dans le trou RESET au dos de l’appareil, un sablier apparaît à
l’écran puis le message « Performing memory Management ».
2. L’écran de calibrage s’affiche à l’écran : « Use stylus to tap center to target » apparaît à
l’écran.
3. Retirez le stylo qui se trouve au dos de l’appareil en haut à gauche.
4. Appuyez au centre des croix : vous devez cliquer au centre de 3 croix au minimum.
« Clear data?» apparaît à l’écran.
5. Réinitialisez l’appareil en sélectionnant « Yes » à l’écran à l’aide du stylo.
L’appareil vous demande alors si vous souhaitez réellement réinitialiser l’appareil.
Sélectionnez « Yes » à l’écran. « System Reset » apparaît, ceci peut prendre plusieurs
minutes, veuillez patienter.
6. Une fois la procédure terminée, l’écran revient automatiquement à l’affichage du menu
principal.
SYNCHRONISATION
La synchronisation vous permet de transférer des données communes telles que votre
agenda, votre liste de chose à faire, votre carnet de Rendez-vous, etc., entre :
• Syncman et votre organiseur,
• Syncman et le iServer.
Syncman peut également synchroniser des données de Outlook 2000 et Lotus Notes.
Español
PASOS A SEGUIR ANTES DE HACER FUNCIONAR EL APARATO
Antes de encender el aparato, retire por favor la película protectora de la pantalla tirando
de la lengüeta situada arriba a la izquierda.
Deslice hacia la derecha el cerrojo del compartimiento de las pilas que está situado en la
parte trasera del aparato.
Deslice hacia abajo la tapa del compartimiento de las pilas de la manera indicada en la
figura y retírela del aparato.
Coloque las 2 pilas tipo AAA que se suministran, observando la polaridad tal como se indica
en el interior del compartimiento de las pilas. Vuelva a colocar la tapa deslizándola hacia
arriba y teniendo cuidado de guiar su posición desde el principio. Deslice hacia la izquierda
el cerrojo del compartimiento de las pilas situado en la parte trasera del aparato para así
bloquearlo. Siga detenidamente este procedimiento al sustituir las pilas cuando se agoten.
Deberá restablecer la configuración de fábrica la primera vez que utilice este aparato, para
ello haga lo siguiente:
1. Inserte la punta fina de objeto en el orificio marcado con la palabra RESET que está
situado en la parte trasera del aparato, aparecerá un reloj de arena y a continuación se
leerá el mensaje “Performing memory Management “.
2. Aparecerá en la pantalla la página de calibración: El mensaje “Use stylus to tap center to
target” aparecerá en la pantalla.
3. Saque el lápiz digital que está situado en la parte trasera del aparato, arriba a la izquierda.
4. Pulse en el centro de las cruces: deberá tocar el centro de al menos 3 cruces. El mensaje
“Clear data?” aparecerá en la pantalla.
5. Restablezca la configuración de fábrica del aparato seleccionando “Yes” con el lápiz digital.
El aparato le preguntará si realmente desea restablecer la configuración de fábrica. Elija
“Yes” en la pantalla. El mensaje “System Reset” aparecerá en la pantalla, esto puede
tardar varios minutos, por favor tenga paciencia.
6. Una vez finalizado el proceso, la pantalla volverá a la página del menú principal.
SINCRONIZACIÓN
La función de sincronización le permite transferir datos compartidos como por ejemplo su
diario, lista de tareas, lista de citas pendientes, etc. entre:
• Syncman y su agenda,
• Syncman y el iServer,
Syncman puede también sincronizar datos procedentes de Outlook 2000 y Lotus Notes.
View the manual for the Lexibook Touchman TM250 here, for free. This manual comes under the category Smartphones and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Lexibook Touchman TM250 or do you need help? Ask your question here
Need help?
Do you have a question about the Lexibook and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Lexibook owners to provide you with a good answer.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Lexibook Touchman TM250 below.
How do I reset mhy Lexibook Touchman TM250?
Most Lexibook model phones can be reset by using a key combination of volume + button, power on/off button and home button at startup.
My SIM card is too small and doesn't fit in my Lexibook phone. Now what?
It is possible to use a SIM card adapter. Insert the too small SIM card into the adapter and then place the adapter in the phone.
What is an IMEI number?
IMEI stands for 'International Mobile Equipment Identity'. This is a unique fifteen-digit number that distinguishes your Lexibook phone from other phones.
What screen dimensions does my Smartphone have?
The size of your Smartphone is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your Smartphone, so you measure the screen from bottom left to top right.
Can the battery of my Smartphone explode?
Make sure the batteries of your Smartphone do not get too hot, in that case there is a very small chance that the battery will explode.
Is the manual of the Lexibook Touchman TM250 available in English?
Unfortunately, we do not have the manual for the Lexibook Touchman TM250 available in English. This manual is available in English.
Need help?
Do you have a question about the Lexibook and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Lexibook owners to provide you with a good answer.
Number of questions: 0