The Lightwave Link Plus requires mains power and a
standard wireless router with a permanent internet
RF frequency:
5V
Energy usage: 3W approx
Warranty:
What do I need?
www.lightwaverf.com
Link Plus
ww
w.lightwaverf.com
The wireless range of a single Link Plus should
Apple devices, with Google Asistant, and
download the app and use it to control devices
12
3
4
Apple, iPhone, iPad and
iPod touch are
Use your voice.
Control while you’re away.
Expanding your system.
There’s even more online at
www.lightwaverf.com
Let’s get started
Product: Link Plus Wireless
Model/
Type:
Ma
nufacturer:
Add
ress:
The object of the
compliance with the applicable
requirements of the following
Refe
rence and date:
Signed for and on behalf of:
Place of Issue: Birmingham
Date of Issue:
Name:
not be disposed of together with
residual waste, but have to be
The owner of old appliances is
responsible to bring the appliances
Environmentally
friendly
disposal
ethernet cable
Take the Ethernet cable (supplied) and
connect it to any spare available LAN port on
your wireless router. Connect the other end
of the cable to the Lightwave Link Plus’ single
port.
power supply
Plug in the power supply and push the the Micro USB
connector into the socket on the back of the Link Plus.
The Link Plus will now enter its startup sequence and
green light appears, the Link Plus is ready to be set up
on the Lightwave Link Plus App.
The LED indicator is used to indicate the status of
the Link Plus and also to indicate if there is a problem.
If there is a problem reported, it will usually refer to
problem (see list on the right). If the Link Plus has
already been set up, the App will display details of any
Download the Lightwave Lionk Plus App from the
App Store.
and tu
torials which will take you through
the setup procedure.
You can also use the Lightwave Web App to set
up and control your Link Plus. This is a more
viewing large installs. This can be accessed at
www.lightwaverf.com.
Follow the in-app Once your Link Plus is set up, you will be able to
any number of Lightwave devices in your home.
You will also be able to control Lightwave devices
via HomeKit using the code on the right. To do this,
open the Home app on your iPhone or iPad, select
the Link Plus and manually enter the code.
1
2
4
Steady green: Status normal
Flashing green:
Fla
shing green / amber: Linking mode
Steady red: Cannot contact server
Download and
start the app
3
LINK PLUS
online or give us a call and we’ll be
happy to help you get started.
HomeKit Accessory Set Up Code
xx-xx-xx-xx
LightwaveRF.
View the manual for the Lightwave Link Plus here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Lightwave Link Plus or do you need help? Ask your question here
Need help?
Do you have a question about the Lightwave and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Lightwave owners to provide you with a good answer.
Need help?
Do you have a question about the Lightwave and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Lightwave owners to provide you with a good answer.
Number of questions: 0