Martin Lighting ·

Martin Thrill Compact Par Mini LED manual

Martin Thrill Compact Par Mini LED
7.1 · 1
PDF user manual  · 2 pages
English
user manualMartin Thrill Compact Par Mini LED

THRILL Compact PAR Mini LED

User Guide

WARNING!
Read the Safety and Installation Guide supplied
with this product before installing or using this
product.

Fixture overview

1
Multi-function bracket
7
DMX Out
2
LED emitters
8
AC Mains in
3
Hand wheel
9
Secondary attachment
point
4
IR receiver
10
control panel
5
DMX IN
11
AC Mains out
6
Microphone
12
Clamp attachment point

Using the control menu

The control menu is shown below. To access the menu, press the MENU button. Scroll through options with the ▼ (down) and ▲ (up) buttons. Press ENTER to select an option. To return to a higher level in the menu, press MENU. To exit the menu, press and hold MENU or wait a few seconds. The default menu settings are shown in bold.
Menu
Explanation

Set DMX address

Select 3-channel DMX mode
Select 6-channel DMX mode

Set Slave fixtures

Set Master fixtures

-

Show selection off

Select preprogrammed show.




Select auto-trigger speed from
1-8


Toggle sound activation on/off


Set microphone sensitivity


Black out if DMX lost

Run stand-alone show

Hold last values if no DMX


-
Toggle display on/off


Inverted/normal display


Manual mode, select effect
and set level from 0 to 255.






Run fixture test routine

Readout fixture hours

Readout firmware version


Reset to default values

DMX mode operation and settings

DMX channel mode ()
The Compact PAR Mini LED has 2 DMX modes that use 3 or 6 channels. The 3 channel mode provides color mixing with 0-100% control of each color; red, green, blue. In 6-channel mode, the Compact PAR Mini LED provides color mixing, 36 popular preset colors, full-range dimming, and strobe effects. The DMX command tables list all functions and their values. To set 3 channel or 6 channel DMX mode: Press MENU to enter the control menu. Scroll to . Press ENTER to confirm.
Scroll to the desired mode:  or .
Press ENTER to save your selection.
DMX address ()
A DMX controller uses either 3 or 6 DMX channels to control the Compact PAR Mini LED. The DMX address is the first channel used. If fixtures are set to 6 channel DMX mode and the first fixture’s DMX address is set to 1, then it receives instructions on DMX channels 1, 2, 3, 4, 5, and 6. The next fixture could then be set to a DMX address of 7. For independent control, each fixture must have its own unique control channels. For symmetric control, identical fixtures can be set to the same DMX address. Assign an address for the fixture on the DMX controller. Then set that address on the Compact PAR Mini LED as follows: 1. Press MENU to enter the control menu. 2. Scroll to . Press ENTER. 3. Scroll to the address that you assigned to the fixture. Press ENTER to save the address.
DMX state ()
The fixture runs in DMX mode whenever it receives DMX signals. When there is no DMX signal, the fixture can be set to run in Show Mode (), black out (), or hold the last DMX values received (). For Show Mode operation, DMX state must be set to . To select behavior when there is no DMX signal: Select  in the control menu and press ENTER.
Select the desired behavior: , , or .
Press ENTER to save your selection.
DMX commands, 3 Channel Mode
Ch.
Value
Function
DMX commands, 6 Channel Mode
Ch.
Value
Function
1
0-7
8-15
16-131
132-139
140-181
182-189
190-231
232-239
240-247
248-255
Shutter
Closed
Open
Strobe, slow to fast
Open
Pulse, fast close/slow open
Open
Pulse, slow close/fast open
Open
Random strobe
Open
2
0-255
Dimmer, intensity 0-100%
3
0-255
Red, intensity 0-100%
4
0-255
Green, intensity 0-100%
5
0-255
Blue, intensity 0-100%
6
0-10
11-15
16-20
21-25
26-30
31-35
36-40
41-45
46-50
51-55
56-60
61-65
66-70
71-75
76-80
81-85
86-90
91-95
96-100
Color presets
Off
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
Color 8
Color 9
Color 10
Color 11
Color 12
Color 13
Color 14
Color 15
Color 16
Color 17
Color 18
Ch.
Value
Function
6
101-105
106-110
111-115
116-120
121-125
126-130
131-135
136-140
141-145
146-150
151-155
156-160
161-165
166-170
171-175
176-180
181-185
186-190
191-192
193-214
215-221
222-243
244-247
248-251
252-255
Color 19
Color 20
Color 21
Color 22
Color 23
Color 24
Color 25
Color 26
Color 27
Color 28
Color 29
Color 30
Color 31
Color 32
Color 33
Color 34
Color 35
Color 36
Off (no preset color)
Continuous color scroll,
fast to slow
Color scroll stop
Reverse color scroll,
slow to fast
Random colors, fast
Random colors, medium
Random colors, slow

Show mode operation and settings

Show mode lets you run a standalone light show without a DMX controller. Shows can be triggered by sound, or automatically triggered at eight speeds. To enable Show Mode operation, set the DMX state setting to .
Show selection ()
Four shows are available. To select a preprogrammed show: Press MENU to enter the control menu. 1. Scroll to  and press ENTER. 2. Select  and press ENTER.
3. Select a show from  to , or select  to disable
Show Mode. Press ENTER.
Music trigger ()
The fixture’s built-in microphone triggers effect and color changes in sync with music. To enable sound activation:
1. Select  in the control menu and press ENTER.
2. Select  to enable sound activation or  to disable it.
3. Press ENTER to save your selection. To adjust microphone sensitivity for the volume of the music: 1. Turn on the music source and set it to the desired volume. 2. Select  in the control menu and press ENTER.
3. Press ▼ or ▲ to decrease or increase the sensitivity level.
4. When the fixture responds as desired, press ENTER.
Auto trigger speed ()
To use auto trigger in Show Mode: 1. Turn off sound activation as described above.
2. Select  in the control menu and press ENTER.
3. Scroll to . Press ENTER. 4. Select a trigger speed from 1 (slow) to 8 (fast). Press ENTER.

Master/slave mode operation and settings

Up to 32 Compact PAR Mini LEDs can be linked in a chain and set to master/slave operation, where the first Compact PAR Mini LED in the chain is set to operate as the “master” that controls the others. This provides synchronized operation without a controller.
1
2
4
7
3
5
6
9
11
12
10
8
1
0-255
Red 0-100%
2
0-255
Green 0-100%
3
0-255
Blue 0-100%

User manual

View the manual for the Martin Thrill Compact Par Mini LED here, for free. This manual comes under the category Lighting and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Martin Thrill Compact Par Mini LED or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Martin and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Samsung Galaxy A7 owners to provide you with a good answer.

Number of questions: 0

Martin Thrill Compact Par Mini LED #1
Martin Thrill Compact Par Mini LED #2
Martin Thrill Compact Par Mini LED #3
Martin Thrill Compact Par Mini LED #4
Martin Thrill Compact Par Mini LED #5
Martin Thrill Compact Par Mini LED #6
+1

Martin Thrill Compact Par Mini LED specifications

Below you will find the product specifications and the manual specifications of the Martin Thrill Compact Par Mini LED.

Convenience in the palm of your hand with a remote control that makes controlling your display easier than ever.
General
Brand Martin
Model Thrill Compact Par Mini LED
Product lighting
Language English
Filetype PDF
Design
Product type Disco laser projector & stroboscope
Suitable for indoor use ✓
Suitable for outdoor use ✗
Product colour Black
International Protection (IP) code IP20
Built-in display ✓
Display type LED
Light intensity dimmer ✓
Control type Buttons
Lamps
Lamp type LED
Lamps quantity 7 lamp(s)
Bulb power 3 W
Bulb lifetime 30000 h
Light colour Blue,Green,Red
Features
Lighting modes DMX,Master/slave,Sound activated,Stand-alone
DMX channels quantity 6 channels
Minimum DMX channels quantity 3 channels
Pulse function ✓
Beam angle (max) 25 °
Ambient temperature (max) 40 °C
Cord length 1.5 m
Remote control function ✓
Ports & interfaces
DMX input ✓
XLR in ✓
Number of pins 3
Power
Power source AC
Input voltage 100 - 240 V
Input frequency 50/60 Hz
Power consumption (typical) 25 W
Weight & dimensions
Ball diameter - "
Width 115 mm
Depth 229 mm
Height 229 mm
Weight 1300 g
Packaging content
Quantity 1
Remote control included ✓
Remote control type IR
AC adapter included ✓
Mounting kit ✓
show more

Questions & answers

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Martin Thrill Compact Par Mini LED below.

Is your question not listed? Ask your question here

No results

Related product manuals

Showtec LED Par 56 Short DMX
user manual 13 pages
Showtec Compact Par 7 Q4
user manual 24 pages
Stairville LED Par System CLB2.4 Compact
user manual 64 pages
Stairville Led Par 64 18x3W 3in1 RGB
user manual 48 pages
Stairville Compact LED-Bar CLB8
user manual 68 pages
Stairville Compact LED-Bar 4 TriPAR CLB4
user manual 68 pages
Stairville Compact LED Bar CLB5
user manual 72 pages
Stairville LED Bar 240/8 RGB
user manual 60 pages
Martin Thrill Vertical Fogger
user manual 2 pages
Varytec LED Pad 7
user manual 56 pages
View all Martin manuals
View all Martin lighting manuals