Microchip MCP1661 manual

Microchip MCP1661
9.8 · 1
PDF user manual
 · 34 pages
English
user manualMicrochip MCP1661
2014-2015 Microchip Technology Inc. DS20005315B-page 1

MCP1661

Features

•36V, 800m Integrated Switch
Up to 92% Efficiency
High Output Voltage Range: up to 32V
1.3A Peak Input Current Limit:
-I
OUT
> 200 mA @ 5.0V V
IN
, 12V V
OUT
-I
OUT
> 125 mA @ 3.3V V
IN
, 12V V
OUT
-I
OUT
> 100 mA @ 4.2V V
IN
, 24V V
OUT
Input Voltage Range: 2.4V to 5.5V
Undervoltage Lockout (UVLO):
-UVLO@V
IN
Rising: 2.3V, typical
-UVLO@V
IN
Falling: 1.85V, typical
No Load Input Current: 250 µA, typical
Sleep mode with 200 nA Typical Quiescent
Current
PWM Operation with Skip mode: 500 kHz
Feedback Voltage Reference: V
FB
= 1.227V
Cycle-by-Cycle Current Limiting
Internal Compensation
Inrush Current Limiting and Internal Soft Start
Output Overvoltage Protection (OVP) in the event
of:
- Feedback pin shorted to GND
- Disconnected feedback divider
Overtemperature Protection
Easily Configurable for SEPIC or Flyback
Topologies
Available Packages:
- 5-Lead SOT-23
- 8-Lead 2x3 TDFN

Applications

Two and Three-Cell Alkaline, Lithium Ultimate and
NiMH/NiCd Portable Products
Single-Cell Li-Ion to 5V, 12V or 24V Converters
LCD Bias Supply for Portable Applications
Camera Phone Flash
Portable Medical Equipment
Hand-Held Instruments
Single-Cell Li-Ion to 3.0V or 3.3V SEPIC
Applications (see Figure 6-3)

General Description

The MCP1661 device is a compact, high-efficiency,
fixed-frequency, non-synchronous step-up DC-DC
converter which integrates a 36V, 800 m NMOS
switch. It provides a space-efficient high-voltage
step-up power supply solution for applications powered
by either two-cell or three-cell alkaline, Ultimate Lithium,
NiCd, NiMH, one-cell Li-Ion or Li-Polymer batteries.
The integrated switch is protected by the 1.3A
cycle-by-cycle inductor peak current limit operation.
There is an output overvoltage protection which turns
off switching in case the feedback resistors are
accidentally disconnected or the feedback pin is
short-circuited to GND.
Low-voltage technology allows the regulator to start-up
without high inrush current or output voltage overshoot
from a low-voltage input. The device features a UVLO
which avoids start-up and operation with low inputs or
discharged batteries for two cell-powered applications.
For standby applications (EN = GND), the device stops
switching, enters Sleep mode and consumes 200 nA
(typical) of input current.
MCP1661 is easy to use and allows creating classic
boost, SEPIC or flyback DC-DC converters within a
small Printed Circuit Board (PCB) area. All
compensation and protection circuitry is integrated to
minimize the number of external components. Ceramic
input and output capacitors are used.

Package Types

* Includes Exposed Thermal Pad (EP); see Tabl e 3-1 .
SW
EN
V
IN
GND
MCP1661
SOT-23
V
FB
MCP1661
2x3 TDFN*
1
2
3
5
4
SW
S
GND
NC
P
GND
NC
1
2
3
4
8
7
6
5
V
IN
ENV
FB
EP
9

High-Voltage Integrated Switch PWM Boost Regulator with UVLO

View the manual for the Microchip MCP1661 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 9.8. This manual is available in the following languages: English. Do you have a question about the Microchip MCP1661 or do you need help? Ask your question here

Need help?

Do you have a question about the Microchip and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Microchip owners to provide you with a good answer.

Number of questions: 0

General
Microchip
MCP1661
not categorized
English
User manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Microchip MCP1661 below.

Is the manual of the Microchip MCP1661 available in English?

Yes, the manual of the Microchip MCP1661 is available in English .

Is your question not listed? Ask your question here

No results