Microchip MCP73826 manual

Microchip MCP73826
8.9 · 1
PDF user manual
 · 24 pages
English
user manualMicrochip MCP73826
2002-2013 Microchip Technology Inc. DS21705B-page 1

MCP73826

Features

Linear Charge Management Controller for Single
Lithium-Ion Cells
High Accuracy Preset Voltage Regulation:
+
1% (max)
Two Preset Voltage Regulation Options:
- 4.1V - MCP73826-4.1
- 4.2V - MCP73826-4.2
Programmable Charge Current
Automatic Cell Preconditioning of Deeply
Depleted Cells, Minimizing Heat Dissipation Dur-
ing Initial Charge Cycle
Automatic Power-Down when Input Power
Removed
Temperature Range: -20°C to +85°C
Packaging: 6-Pin SOT-23A

Applications

Single Cell Lithium-Ion Battery Chargers
Personal Data Assistants
Cellular Telephones
Hand Held Instruments
Cradle Chargers
•Digital Cameras

Typical Application Circuit

Description

The MCP73826 is a linear charge management con-
troller for use in space-limited, cost sensitive applica-
tions. The MCP73826 combines high accuracy
constant voltage, controlled current regulation, and cell
preconditioning in a space saving 6-pin SOT-23A pack-
age. The MCP73826 provides a stand-alone charge
management solution.
The MCP73826 charges the battery in three phases:
preconditioning, controlled current, and constant volt-
age. If the battery voltage is below the internal low-volt-
age threshold, the battery is preconditioned with a
foldback current. The preconditioning phase protects
the lithium-ion cell and minimizes heat dissipation.
Following the preconditioning phase, the MCP73826
enters the controlled current phase. The MCP73826
allows for design flexibility with a programmable charge
current set by an external sense resistor. The charge
current is ramped up, based on the cell voltage, from
the foldback current to the peak charge current estab-
lished by the sense resistor. This phase is maintained
until the battery reaches the charge-regulation voltage.
Then, the MCP73826 enters the final phase, constant
voltage. The accuracy of the voltage regulation is better
than ±1% over the entire operating temperature range
and supply voltage range. The MCP73826-4.1 is preset
to a regulation voltage of 4.1V, while the MCP73826-
4.2 is preset to 4.2V.
The MCP73826 operates with an input voltage range
from 4.5V to 5.5V. The MCP73826 is fully specified
over the ambient temperature range of -20°C to +85°C.

Package Type

+
-
GND
V
DRV
V
SNS
V
IN
V
BAT
SHDN
12
3
6
5
4
10 µF
100 k
100 m
V
IN
Single
Lithium-Ion
Cell
NDS8434
MA2Q705
500 mA Lithium-Ion Battery Charger
5V
10 µF
MCP73826
6-Pin SOT-23A
GND
V
DRV
V
SNS
V
IN
V
BAT
SHDN
1
2
3
6
5
MCP73826
4

Single Cell Lithium-Ion Charge Management Controller

View the manual for the Microchip MCP73826 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Microchip MCP73826 or do you need help? Ask your question here

Need help?

Do you have a question about the Microchip and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Microchip owners to provide you with a good answer.

Number of questions: 0

General
Microchip
MCP73826
not categorized
English
User manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Microchip MCP73826 below.

Is the manual of the Microchip MCP73826 available in English?

Yes, the manual of the Microchip MCP73826 is available in English .

Is your question not listed? Ask your question here

No results