OvisLink FE-100T manual

OvisLink FE-100T
(1)
  • Number of pages: 1
  • Filetype: PDF
Teléfono de asistencia cnica: 902 152 608 w w w . o v i s l i n k c o r p . e s
Indice
Características Técnicas:
Dependiendo de los modelos las características son las
siguientes:
Conexiones de Fibra:
- Conectores SC, ST, MT-RJ, VF-45 o LC para multi-
modo, y conector SC para mono-modo
- Cumple con los estándares IEEE 802.3u 100BaseFX
- PCI 2.1
- PCI bus
- Separa 2K Bytes FIFO para recibir y transmitir
controladores
Control de Flujo:
- Soporta IEEE 802.3X para full duplex
- Multiple pause frame XON/XOFF
- ACPI (Advanced Configuration and Power Interface):
- Soporta PC99, PC2001 y requerimientos de red del PC
- Soporta (PCI Bus Power Management Interface
Specification Version 1.0/1.1)
- Soporta (ACPI Specification 1.0)
- Soporta (Network Device Class Power Management
Specification Version 1.0a)
- Soporta (Wake-up even support link change/magic
packet/unicast physical address/MS define pattern
match)
Funciones avanzadas MAC:
- IEEE 802.1p prioridad de transmisión, programable
(mediante driver) 8 colas máximas de prioridad
- IEEE 802.1q multiple VLAN con VLAN ID auto
inserción/extracción y soporte de filtro VID
- UDP, TCP/IP checksum offload para tramas Ipv4
- Dos LEDs: LNK/ACT (link/actividad), 100 (velocidad)
Soporte de Drivers:
El adaptador soporta un rango amplio de dirvers para las
redes comúnmente usadas por los sistemas operativos:
- Windows 95 (including OSR2), Windows 98 (including
SE), Windows ME, Win2000, Windows XP, Workgroups
3.11, Windows NT 3.51 and 4.0
- LAN Manager, LANtastic, PC-NFS
- NCSA Telnet
- Novell Netware 3.11,3.12, 4.x, 5.x, 6.0, Client 32,
Netware Client
- RedHat Linux 6.2, 7.0, 7.1
- FreeBSD 3.2, 4.0, 4.11, 4.2
- Unix Ware 8.0, SCO UNIX 5.0
Utilidades:
- Windows auto instalación, Utilidad para diagnosticos
MS-DOS
- Desktop Management Interface (DMI) 2.0
- Soporte BootBios por actualización Flash, Carga
remota del programa para MS-DOS, y Windows 95
- Ejecuta un prearranque con interfaz
Especificaciones:
- Tarjeta de red Fibra Óptica.
- Velocidad: 100 Mbps.
- Conector: SC / ST / VF-45 / MT-RJ
- Distancia: Hasta 2Km.
- Gran variedad de conectores de fibra (Todos los
conectores son multimodo y SC solo para monomodo)
- Soporta 32-bit Bus Master operation
- Reloj del Bus PCI desde 16.75 to 40 MHz
- Soporta Wake-On-LAN (WOL) y wake-up remoto
- Hasta 200Mbps de ratio de transferencia
(Half-duplex / Full-duplex)
- Cumple con IEEE 802.3u 100BASE-FX
- Cumple con PCI Specifications Revision 2.1
- Escasa utilización del CPU
- LEDs de estado
Modelos:
FE-100C / FE-100T / FE-100V / FE-100M

Familia FE-100

Tarjetas de red Gigabit Fibra Óptica

3.5
OvisLink FE-100T

Need help?

Number of questions: 0

Do you have a question about the OvisLink FE-100T or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other OvisLink FE-100T owners to properly answer your question.

View the manual for the OvisLink FE-100T here, for free. This manual comes under the category Network cards/adapters and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the OvisLink FE-100T or do you need help? Ask your question here

OvisLink FE-100T specifications

General
Brand OvisLink
Model FE-100T
Product Network card/adapter
Language English
Filetype PDF
Network
Maximum data transfer rate 200 Mbit/s
Full duplex
Maximum operating distance 2000 m
Supported network protocols UDP, TCP/IP
Wake-on-LAN ready
Other features
Supported data transfer rates 10/100 Mbps
Link/Act LED
Compliance industry standards EEE 802.3, IEEE 802.3u, IEEE 802.1p, IEEE 802.1q
Connector(s) SC / ST / VF-45 / MT-RJ
Ports & interfaces
Connectivity technology Wired
Host interface PCI
Interface Ethernet
Design
Chipset -
LED indicators
Internal
null
System requirements
Compatible operating systems Windows 95/98/ME/2000/XP\nWorkgroups 3.11\nWindows NT 3.51/4.0\nNovell Netware 3.11,3.12, 4.x, 5.x, 6.0, Client 32, Netware Client\nRedHat Linux 6.2, 7.0, 7.1\nFreeBSD 3.2, 4.0, 4.11, 4.2\nUnix Ware 8.0, SCO UNIX 5.0
show more

Questions & answers

Below, you will find customer questions and answers about the OvisLink FE-100T.

Is your question not listed? Ask your question here