Raikko Cone Bluetooth manual

Raikko Cone Bluetooth
7.5 · 1
PDF user manual
 · 2 pages
user manualRaikko Cone Bluetooth

Cone Bluetooth



Dear Customer, Thank you for choosing a RAIKKO
Cone Bluetooth
is a mobile speaker system.
It transmits audio signals through a Bluetooth
or cable
(3.5 mm jack) connection.
A On/off switch
B Microphone
c Volume –/Back
d Play/Pause
E Volume +/Forward
F Pairing / Answer call
G Charging socket
(Micro USB)
H Line IN socket (3.5 mm)
I USB charging cable
J 1 line IN cable (3.5 mm jack)
K LED display
In tHE BoX
Cone Bluetooth
Speaker, 1 USB charger cable,
1 line IN cable (3.5 mm jack), 1 carrying pouch
SWItcHInG on/oFF
Slide the switch (A) to the right (ON) to turn the speaker on.
Slide the switch (A) to the left (OFF) to turn the speaker off.
The speaker is automatically in Bluetooth
mode when
switched on. If a device that has already been connected
is within range, it will connect automatically.
connEctIon VIA BLuEtootH
After being switched on, the device will be in “pairing mode”.
Activate the Bluetooth
interface on your audio device (M) and pair
the speaker with it.
If there is a Bluetooth
-enabled device within range that has
already been paired with the speaker, this will be connected rst.
Disconnect this device if required and connect another Bluetooth
enabled device.
For additional information please consult the user manual for your
device (M).
The maximum range of the wireless signal is 10 m.
Large obstacles, such as furniture, walls and electronic devices,
can limit the range.
It is not possible to pair multiple devices at the same
time. Only one audio device can access the speaker at
any given time.
connEctIon BY cABLE
To play audio in cable mode, connect the Line IN cable (J) into the
appropriate speaker socket (H).
Connect the other end of the cable to the headphone output on your
audio device (M) or to the audio output on a computer/laptop (n).
Playback via Bluetooth
connection stops automatically
when a cable is inserted. If the cable is removed, playback
through Bluetooth
may be restarted (if an audio device is
The playback function on the audio device can be controlled
remotely from the speaker if the audio device supports this feature.
Operation using the speaker’s function keys:
Press key (d) once briey to start or stop playback.
Press key (E) once briey to change to the next track.
Press key (c) once briey to restart the current title from the
beginning, or repeatedly to switch to previous tracks.
In cable mode, audio can only be played back (play/pause,
next/previous track) through the connected audio device.
When the speaker is switched on, the volume will be set to a
medium level. The volume can be controlled using the volume
control function on your audio device or directly using the keys on
the speaker.
Hold down the + key (E) to increase the volume.
Hold down the – key (c) to decrease the volume.
It is possible to overload the speakers with a high signal level.
Choose a volume level that will not distort the sound.
The speaker has a built-in microphone. When using a Bluetooth
enabled mobile phone, you can use the speaker-phone function.
To answer a call, press the phone key (F) briey (marked with
a phone symbol). To end a call, press the phone key (F) again
(marked with a phone symbol). Reject calls by holding down the
phone key (F).
Charge the speaker completely before using it for the rst time. The
rst charge cycle can take up to 3 hours. Connect the speaker to
the USB port on a PC/MAC™ or a USB mains adapter to charge it.
Use the connection cable (J) provided.
Connect one end to the speaker’s charging socket (Micro USB) (G)
and the other end to the appropriate USB port.
The LED display (K) will turn red while charging.
The LED display (K) will turn off when the battery is fully charged.
A complete charge cycle will last approximately three hours.
Dimensions: (L) 74 × (W) 74 × (H) 65 mm
Weight: 252 g
Music output: 5 watts RMS
Frequency range:
45 mm diaphragm
90 Hz–20 kHz
Battery type: Lithium polymer
Charging voltage: 5 V (USB)
1× Micro USB (charging socket),
1× Line IN (3.5 mm),
3.0 (A2DP, AVRCP)

View the manual for the Raikko Cone Bluetooth here, for free. This manual comes under the category Cradles & Docking Stations and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Raikko Cone Bluetooth or do you need help? Ask your question here

Need help?

Do you have a question about the Raikko and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Raikko owners to provide you with a good answer.

Number of questions: 0

Get the thin device you want without sacrificing battery life. The lithium polymer battery delivers the same long-lastin...
Cone Bluetooth | 5687190
Cradle / docking station
Manual (PDF)
Audio output channels- channels
Number of speakers-
Number of drivers-
Speaker type-
RMS rated power5 W
Frequency range90 - 20000 Hz
Impedance- Ω
Ports & interfaces
Connectivity technologyWired & Wireless
Bluetooth version3.0+HS
Bluetooth profilesA2DP, AVRCP
Microphone in
Headphone out
3.5 mm connector
Product designOther
Product colourBlack
Volume controlDigital
Built-in display
On/off switch
Recommended usageUniversal
Power source typeBattery
Number of batteries supported1
Battery life (max)8 h
Battery technologyLithium Polymer (LiPo)
USB charging
Other features
Wireless connection
Weight & dimensions
Width74 mm
Depth74 mm
Height65 mm
Weight252 g
Packaging content
Cables includedAudio (3.5mm), USB
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Raikko Cone Bluetooth below.

Is your question not listed? Ask your question here

No results