Siemens Landis & Staefa REV11 manual

Siemens Landis & Staefa REV11
8.2 · 5
PDF user manual
 · 2 pages
English
user manualSiemens Landis & Staefa REV11

Operating instructions

Landis & Staefa REV11…

REV11… - the temperature controller that allows you to set the ideal room temperature at the
time you want. There are two switching patterns available that can be set to suit your specific
needs. You can either rely on the factory settings or make settings tailored to your personal
needs.
Setting slider
Changing the setting values

Display

Settin

g
s
Time of day
Room temperature
(measured)
Time of day
Remote operation active
(if connected)
Standby
Normal temperature
Heating on
Economy temperature
Replace batteries
°C
1.5V 'AA'
1.5V 'AA'

Operation

Continuous
normal temperature
Continuous
economy temperature
Standby
with frost protection
Operating mode
selector
Change
between normal and
economy mode up to the
next switching point
Warmer/colder setting
valid up to the next
switching point
(increments of 0.2 ºC,
± 4 ºC max.)
24-hour mode A
with 2 heating periods
Auto
Run
A1 A2 A3 A4
B1 B 2
Operating
position
Auto
Run
Economy
temperature
Normal
temperature
Switching times
B1...B2
B1
B2
Switching times
A1...A4
A1
A2 A3 A4
2222Z11E
24-hour mode B
with 1 heating period
A
B

Commissioning with quick startup

The controller is supplied with factory-set switching patterns, switching times and
temperatures. To commission it, proceed as follows:
1.5V 'AA'
1.5V 'AA'
Remove the black transit tabs from the two batteries. Check to see if the battery
holder is in its correct position. The controller switches itself on.
Move the setting slider to the time position.
Press buttons to set the correct time of day.
Auto
Run
Move the setting slider back to position on the right, because only that position
allows you to close the cover.
A
Select the required operating mode with the operating mode selector (e.g.
A
).
Fold up the operating instructions again, place them back into the cover and close the cover
again.

Do you want to use automatic

operation?

If that is the case, set the operating
mode selector to one of the
following positions:
A
You use the 24-hour setting
A
with
two
heating periods.
B
You use the 24-hour setting
B
with
one
heating period.

Do you require continuous normal

temperature?

Move the operating mode selector
to «Normal temperature». This
ensures continuous heating to the
normal temperature. The display
shows
.

Do you require continuous economy

temperature?

Move the operating mode selector
to «Economy temperature». This
ensures continuous heating to the
economy temperature. The display
shows
.

Do you require continuous standby

with frost protection?

Move the operating mode selector
to «Standby». In that case, heating
is provided only when the room
temperature falls below the preset
frost protection limit (5 °C). The
display shows
.

Do you feel too warm or too cold?

°C
By pressing these buttons, you
increase or decrease the actual
room temperature in increments of
0.2 °C by a maximum of ± 4°C. The
display first shows the newly
selected temperature and then the
actual value again.
These
changes are valid only up to the
next switching point.
If, as a
result of the factory settings, you
always feel either too warm or too
cold, you should readjust the
temperature
or to suit your
needs
.

User manual

View the manual for the Siemens Landis & Staefa REV11 here, for free. This manual comes under the category Thermostat and has been rated by 5 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Siemens Landis & Staefa REV11 or do you need help? Ask your question here

Need help?

Do you have a question about the Siemens Landis & Staefa REV11 and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Siemens Landis & Staefa REV11 owners to provide you with a good answer.

Number of questions: 0

Siemens Landis & Staefa REV11 specifications

Below you will find the product specifications and the manual specifications of the Siemens Landis & Staefa REV11.

General
Brand Siemens
Model Landis & Staefa REV11
Product Thermostats
Language English
Filetype manual_type_manual (PDF)

Questions & answers

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens Landis & Staefa REV11 below.

Is your question not listed? Ask your question here

No results