Siemens RDE100FP manual

Siemens RDE100FP
6.6 · 1
PDF user manual
 · 4 pages
English
user manualSiemens RDE100FP
1/4 Operating Instructions CB1B1426en_01 / 2013-07-05 Siemens Building Technologies

s

Operating Instructions
RDE100FP
The RDE100FP is a programmer with 3 "Fil Pilote" zones to select Comfort or Economy mode for different
zones at any time.
Note: - The Comfort setpoint must be set directly on each radiator’s thermostat
- The radiator’s operating mode must be set to "Automatic"
1 Display
Stop mode
Confirmation
Auto Timer mode
F
Room temperature in
degrees Fahrenheit
View and set Auto Timer
Comfort mode
C
Room temperature in
degrees Celsius
Economy mode
Button lock activated
Escape
Room temperature
Setting the weekday and
the time of day
Display of zone
Holiday mode setting
Weekday 1 = Monday
Weekday 7 = Sunday
Time of day
Timer bar
Morning: 12-hour format
Afternoon: 12-hour format
Current room
temperature
2 Change operating mode
3 Set
4 Ok
5 Decrease zone value
6 Increase zone value
Do you want to set the time of day and the weekday?
Set
Ok
+
Mode
!
Proceed as follows:
Press Set and select
Press Ok and the time of day flashes for setting
Press
+ or to set the time of day
Press Ok to confirm
Weekday flashes; press
+ or to select the weekday
Press Ok to save
Press Mode to exit or wait for the program to exit automatically
Note:
In the event of a power failure followed by power restoration, the time of day flashes, which means that the user
must adjust it and repeat the steps from point 3 above.
All others setting are saved.
Until the time setting is made, the program sends protection commands to all available zones.
Do you want to lock the buttons?
Mode Press and hold Mode for at least 7 seconds to activate a button lock. Repeat to unlock.
The unit operates normally when the buttons are locked, but changes cannot be made.
Do you want to set your Holiday mode?
Set
Ok
+
Mode

!

You can enable Holiday mode for all zones. The radiator managed by the programmer controls the room
temperature with the Protection setpoint.
Press Set and select
Press Ok to confirm
Press
+ or to set the number of days for holidays (0 = Holiday mode Off)
Press Ok to save
When Holiday mode is activated, the remaining days are displayed
Note:
If Mode is pressed while Holiday mode is active, the function is deactivated and the symbol disappears.
Energy saving tips without loss of comfort
Select Auto Timer mode during the heating period and set the time switch as desired
Select Economy or Holiday mode for longer periods of non-occupancy and during the summer

User manual

View the manual for the Siemens RDE100FP here, for free. This manual comes under the category Thermostat and has been rated by 1 people with an average of a 6.6. This manual is available in the following languages: English. Do you have a question about the Siemens RDE100FP or do you need help? Ask your question here

Need help?

Do you have a question about the Siemens RDE100FP and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Siemens RDE100FP owners to provide you with a good answer.

Number of questions: 0

Siemens RDE100FP specifications

Below you will find the product specifications and the manual specifications of the Siemens RDE100FP.

General
Brand Siemens
Model RDE100FP
Product Thermostats
Language English
Filetype manual_type_manual (PDF)

Questions & answers

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens RDE100FP below.

Is your question not listed? Ask your question here

No results