Siemens REA23 manual

Siemens REA23
8.8 · 1
PDF user manual
 · 2 pages
English
user manualSiemens REA23
Symbole
Absence
Special day
2 Comfort
periods
“Time” menu Heating active
Setpoint
comfort
3 Comfort
periods
T
“Temperature
menu
Cooling active
Setpoint
economy
Current weekday
“Comfort
period“ menu
Automatic
operation
Setpoint
protective temp.
Working-day group
“Absence”
menu
Continuously
comfort mode
Setpoint remote
operation
Weekend group
Battery
change
Continuously
economy mode
Setpoint
absence
Entire week
Commissioning and quick start
Remote
operation
Frost- or / over-
heating protection
1 Comfort
period
Time schedule
Functions of
the ESC-button, the setting knob and the OK-button
ESC-button
ESC
Press the ESC-button to return
to the menu level previously
activated or to leave the menu
level in a number of steps until
you reach the initial display
(the settings currently displayed
will be accepted).
+

ESC OK

OK-button:
OK
You access the menu level
You activate the menu
You save the inputs
You switch to the next
menu item
You accept the menu item
1. Remove controller from its base and open cover
of the battery compartment.
2. Remove the black battery transit tab. The
controller will switch itself on.
3. Close the battery compartment and replace
the controller.
Selecting the operating mode
Setting knob:
Setting knob is operative in menu levels only !
You go from one menu to the next
You change the setting variables (temperature in increments
of 0.2 °C, time in increments of hours and minutes)
You select predefined functions
The operating mode selector enables you
to select 5 different operating modes:
Setting the time of day and the weekday
Adjustable in operating modes , , and
Automatic operation with a maximum of
3 comfort periods (heating / cooling periods)
Continuously comfort mode
Continuously economy mode
Continuously frost-/ overheating protection mode
Special day with one comfort period
Changing temporarily the current setpoint temperature
OK
OK
h
OK
h
OK
ESC
If no button is pressed for 20 seconds, the setting
displayed will be accepted and the initial display
will appear again.
1. OK-button: You access the menu level;
the clock flashes.
2. OK-button: You accept the menu;
the hours flash.
3. Setting knob: Set the current hour.
4. OK-button: You save the input;
the minutes flash.
5. Setting knob: Set the current minute.
6. OK-button: You save the input;
the weekday flashes.
7. Setting knob: Select the current weekday.
8. Press the ESC-button to return to the menu level:
the T menu flashes
(change not necessarily required;
press the ESC-button again to return
to the initial display).
° C
The change is maintained until the next switching point is reached!
Changing temperatures long-term
Adjustable in operating modes , , and
1. When pressing the or button for the
first time, the currently valid setpoint temperature
will be displayed. It can be readjusted in
increments of 0.2 °C (max. +/-4 °C).
2. After 3 seconds, the initial display will
automatically appear again.
Changing temporarily the temperature setpoint (savings tip)
OK
OK
OK
° C
OK
OK
° C
OK
OK
° C

OK
OK
° C

ESC
ESC
If no button is pressed for 20 seconds, the setting
displayed will be accepted and the initial display
will appear again.
1. OK-button: You access the menu level the clock
flashes.
2. Setting knob: Clockwise to the T menu.
3. OK-button: You accept the menu;
symbol
flashes.
4. OK-button: You accept ; the setpoint flashes.
5. Setting knob: Set the comfort temperature
6. OK-button: You save the input;
symbol
flashes.
7. OK-button: You accept
; the setpoint flashes.
8. Setting knob: Set the economy temperature.
9. OK-button: You save the input; symbol
flashes.
10. OK-button: You accept
; the setpoint flashes.
11. Setting knob: Set the frost protection
temperature.
12. OK-button: You save the input; symbol
flashes.
13. OK-button: You accept
; the setpoint
flashes.
14. Setting knob: Set the temperature setpoint while
remote operation is active.
15. Press the ESC-button to return to the menu level:
The comfort periods
menu
flashes
(Change not necessarily required;
press the ESC-button again to return
to the initial display.)
In operating modes and , this
button can be pressed to make a manual
change from comfort to economy mode,
or vice versa. The change will
automatically be cancelled when
reaching the next switching point or when
selecting another operating mode.
Siemens / Building Technologies / HVAC Products B2216de 15.02.2007
en
Operating Instructions

REA23…

User manual

View the manual for the Siemens REA23 here, for free. This manual comes under the category Thermostat and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Siemens REA23 or do you need help? Ask your question here

Need help?

Do you have a question about the Siemens REA23 and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Siemens REA23 owners to provide you with a good answer.

Number of questions: 0

Siemens REA23 specifications

Below you will find the product specifications and the manual specifications of the Siemens REA23.

General
Brand Siemens
Model REA23
Product Thermostats
Language English
Filetype manual_type_manual (PDF)

Questions & answers

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens REA23 below.

Is your question not listed? Ask your question here

No results