Do you have a question about the Whirlpool WDTA50SAKZ or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Whirlpool WDTA50SAKZ owners to properly answer your question.
Jeff Smith
• 21-1-2022
No comments
I need to know how and what parts are necessary to repair a leak with my dishwasher. The leak is around the heating coil end connectors
Answer this question
Jb
• 13-1-2022
No comments
What year is this dishwasher?
Answer this question
Melanie
• 11-1-2022
No comments
The dishwasher turns off as soon as it is started. No error codes or blinking lights. How do I fix that
Answer this question
Lisa Salvage
• 9-1-2022
No comments
How do I get an owners manual
Answer this question
Sahil
• 28-12-2021
No comments
Do i need hot water or cold water supply line to the dishwasher?
Answer this question
Scott
• 11-12-2021
No comments
Dishwasher continually beeps and does not run and displays and flashes F8 ,E4 just installed and already wonky
Answer this question
Ken Horne
• 22-11-2021
2 comments
Manual for wdta50sakz
LINDA
• 10-12-2021
CAN I PRINT THE MANUAL WDTA50SAKZ
Nancy Ralph
• 13-12-2021
I would like a printed copy of the manual please
Answer this question
Karen Moeller
• 22-11-2021
No comments
After dishwasher starts it beeps and does not continue to wash.
Display shows E1 F9. Water lays in bottom.
Answer this question
Lucy Miller
• 15-11-2021
No comments
Same questions asked … why so much water in dishwasher after drying cycle done and why 3.5 hours for cycle??
Answer this question
Robin Carnovale
• 11-11-2021
No comments
Why is there water on the door of my dishwasher when it is finished on heat dry
View the manual for the Whirlpool WDTA50SAKZ here, for free. This manual comes under the category Dishwashers and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Whirlpool WDTA50SAKZ or do you need help? Ask your question here
Below, you will find customer questions and answers about the Whirlpool WDTA50SAKZ.
What do I do about a smelly dishwasher?
In the case of a smelly dishwasher, you can take the following steps:
- Clean the filters
- Clean the spray arms
- Clean the door rubbers
- Run a hot wash program
- Run an empty machine with a dishwasher cleaner
Do you have to pre-rinse the dishes?
It is not recommended to rinse dirty dishes before placing them in the dishwasher.
For the life cycle of the machine, it is better to put everything dirty in the dishwasher.
The grease on the dirty dishes is the lubrication for the pump in the machine.
How much dishwashing detergent should I use?
The average amount used is about 25 grams of dishwashing detergent. It is recommended to follow the advice on the packaging.
How do I add softening salt to my dishwasher?
Each dishwasher has a separate compartment for softening salt. It opens when you turn the knob on the compartment. The softening salt can then be poured into the compartment by means of a funnel.
Is the manual of the Whirlpool WDTA50SAKZ available in English?
Unfortunately, we do not have the manual for the Whirlpool WDTA50SAKZ available in English. This manual is available in English.
I need to know how and what parts are necessary to repair a leak with my dishwasher. The leak is around the heating coil end connectors