View the manual for the Whirlpool WFE 2B19 here, for free. This manual comes under the category dishwashers and has been rated by 12 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Whirlpool WFE 2B19 or do you need help? Ask your question here
The Whirlpool WFE 2B19 is a freestanding dishwasher with button controls. It has an energy efficiency class of A+ (old rating) and a drying class of A. The dishwasher has an annual energy consumption of 295 kWh, an annual water consumption of 3080 L, and a noise level of 49 dB. It can accommodate up to 13 place settings and features a static drying system. There are 5 washing programs available, and the dishwasher has a half-load option. The energy consumption per cycle is 1.04 kWh, and the power consumption in off-mode is 0.5 W. The cycle time for the dishwasher is 190 minutes. Overall, the Whirlpool WFE 2B19 is a standard freestanding dishwasher with relatively average energy and water consumption. It has a moderate noise level, accommodates a good amount of place settings, and includes a few useful features such as the half-load option and static drying system. The washing programs cover the basics, but there may be other models available with more specialty wash options.
|Cutlery compartment type||Basket|
|Upper basket adjustable height||Yes|
|Tub material||Stainless steel|
|Inlet hose length||1.55 m|
|Cord length||1.3 m|
|Outlet hose length||1.5 m|
|Product size||Full size (60 cm)|
|Control panel colour||White|
|Energy efficiency class (old)||A+|
|Energy consumption per cycle||1.04 kWh|
|Power consumption (off)||0.5 W|
|AC input voltage||220 - 230 V|
|AC input frequency||50 Hz|
|Water consumption per cycle||11 L|
|Connected load||1900 W|
|Annual energy consumption||295 kWh|
|Annual water consumption||3080 L|
|Noise level||49 dB|
|Number of place settings||13 place settings|
|Number of washing programs||5|
|Dishwashing programs||Eco, Intensive, Pre-wash, Quick|
|Cycle time||190 min|
|Delayed start timer||Yes|
|Delay start (max)||8 h|
|Rinse aid indicator||Yes|
|Package width||650 mm|
|Package depth||675 mm|
|Package height||910 mm|
|Package weight||49000 g|
|Installation compartment width||600 mm|
|Installation compartment depth||570 mm|
|Installation compartment height (min)||820 mm|
|Installation compartment height (max)||900 mm|
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WFE 2B19 below.
In the case of a smelly dishwasher, you can take the following steps: - Clean the filters - Clean the spray arms - Clean the door rubbers - Run a hot wash program - Run an empty machine with a dishwasher cleaner
It is not recommended to rinse dirty dishes before placing them in the dishwasher. For the life cycle of the machine, it is better to put everything dirty in the dishwasher. The grease on the dirty dishes is the lubrication for the pump in the machine.
The average amount used is about 25 grams of dishwashing detergent. It is recommended to follow the advice on the packaging.
Each dishwasher has a separate compartment for softening salt. It opens when you turn the knob on the compartment. The softening salt can then be poured into the compartment by means of a funnel.
The Whirlpool WFE 2B19 has a weight of 47000 g.
The Whirlpool WFE 2B19 has a height of 850 mm.
The Whirlpool WFE 2B19 has a width of 600 mm.
The Whirlpool WFE 2B19 has a depth of 600 mm.
Yes, the manual of the Whirlpool WFE 2B19 is available in English .
Is your question not listed? Ask your question here